[access-uk] Re: FineReader and JFW
- From: "Andy Collins" <andy@xxxxxxxxxxxxxxxxxxx>
- To: <access-uk@xxxxxxxxxxxxx>
- Date: Sat, 27 Jan 2007 13:56:57 -0000
Ok, Thanks Marie, I'll keep on persevering :] Andy
----- Original Message -----
From: "Marie BAISEZ" <marie.baisez@xxxxxxxxxx>
To: <access-uk@xxxxxxxxxxxxx>
Sent: Saturday, January 27, 2007 1:10 PM
Subject: [access-uk] Re: FineReader and JFW
Andy, like you, I bought the programme online and, as far as I remember
chose the standard installation. Someone showed me how to open fine reader
from Word and I've never looked back. I know that with all this computer
stuff, there are many ways of going about it to achieve the same thing, but
I tend to stick to one otherwise, I get in a muddle. Sorry for stating the
obvious but looks like you need a pair of eyes to tell you the message
flashing on the screen when the shark shuts up or perhaps you could start
Narator with windows key+u and listen for info. As a last resort you might
consider re-installing fine rreader making sure your scanner is plugged in
and connected to your pc when you are doing so. It and fine reader might
find a few word to say to each other and things might come right for you.
Nothing else I can think of as I'm not very technically minded. Hope you get
it sorted soon. Good luck!
Marie
p.s. In all this, always remember to alt tab to see all the windows on your
screen, sometimes Jaws loses focus because some windows calls it to
attention and you have to put it back where you want it to be.
----- Original Message -----
From: "Andy Collins" <andy@xxxxxxxxxxxxxxxxxxx>
To: <access-uk@xxxxxxxxxxxxx>
Sent: Saturday, January 27, 2007 1:10 PM
Subject: [access-uk] Re: FineReader and JFW
> Hi Marie - Just tried launching the programmed this way, but the same
> thing
> happened, JFW just froze!
>
> Can I ask you [and maybe we might need to take this off list] but did you
> install all of the FR software from the download when you purchased the
> programmed? I did, and although when I try to open the programmed now, JFW
> freezes, it did open once, and I went to the tools menu, clicked on
> options,
> and tabbed once to try and change the interface from the twain setting to
> that of FineReader, but the FR interface didn't show up in the drop down
> box. It looks like I need to change some setting to get this programmed
> working with JFW, and I don't know what these are, so would appreciate any
> help.
>
> Thanks - Andy
>
>
> ----- Original Message -----
> From: "Marie BAISEZ" <marie.baisez@xxxxxxxxxx>
> To: <access-uk@xxxxxxxxxxxxx>
> Sent: Saturday, January 27, 2007 11:02 AM
> Subject: [access-uk] Re: FineReader and JFW
>
>
> I never open Finereader in Programmes. I open Word, choose the lists of
> macros with alt+f8, find Fine reader in there and press enter. Takes a
> while
> for the programme to load as it has to activate the scanner but, after
> about
> 30 seconds, it's there.
> Hopes this helps.
> Marie
> ----- Original Message -----
> From: "Andy Collins" <andy@xxxxxxxxxxxxxxxxxxx>
> To: <access-uk@xxxxxxxxxxxxx>
> Sent: Saturday, January 27, 2007 11:50 AM
> Subject: [access-uk] FineReader and JFW
>
>
>> Hi all - in addition to my earlier posted problem of not seeing the
>> FineReader interface as a choice under options for scanning, only having
>> listed the twain interface of my Epsom 3170, there is another issue,
>> which
>> is everytime I go to open the program by clicking on FineReader7 from
>> within
>> the Programs folder, JFW freezes, and I have to re-boot.
>>
>> Any fR users on the list with any idea about either of these problems?
>>
>> Thanks - Andy
>>
>> ** To leave the list, click on the immediately-following link:-
>> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
>> ** If this link doesn't work then send a message to:
>> ** access-uk-request@xxxxxxxxxxxxx
>> ** and in the Subject line type
>> ** unsubscribe
>> ** For other list commands such as vacation mode, click on the
>> ** immediately-following link:-
>> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
>> ** or send a message, to
>> ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
>>
>>
>>
>> __________ NOD32 2011 (20070127) Information __________
>>
>> This message was checked by NOD32 antivirus system.
>> http://www.eset.com
>>
>>
>
>
> ** To leave the list, click on the immediately-following link:-
> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
> ** If this link doesn't work then send a message to:
> ** access-uk-request@xxxxxxxxxxxxx
> ** and in the Subject line type
> ** unsubscribe
> ** For other list commands such as vacation mode, click on the
> ** immediately-following link:-
> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
> ** or send a message, to
> ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
>
>
> --
> This email has been verified as Virus free
> Virus Protection and more available at http://www.plus.net
>
> ** To leave the list, click on the immediately-following link:-
> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
> ** If this link doesn't work then send a message to:
> ** access-uk-request@xxxxxxxxxxxxx
> ** and in the Subject line type
> ** unsubscribe
> ** For other list commands such as vacation mode, click on the
> ** immediately-following link:-
> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
> ** or send a message, to
> ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
>
>
>
> __________ NOD32 2011 (20070127) Information __________
>
> This message was checked by NOD32 antivirus system.
> http://www.eset.com
>
>
** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
--
This email has been verified as Virus free
Virus Protection and more available at http://www.plus.net
** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
Other related posts: