[AR] Re: Source of RP-1 & RP-2

  • From: "Rick Wills" <willsrw@xxxxxxxxx>
  • To: <arocket@xxxxxxxxxxxxx>
  • Date: Tue, 12 Oct 2021 19:12:45 -0400

Ed

Exxsol D-40 is a useful fuel.  Do  you know if they have Exxsol D-80?  D80 is 
denser.

Thanks,

Rick Wills

-----Original Message-----
From: arocket-bounce@xxxxxxxxxxxxx <arocket-bounce@xxxxxxxxxxxxx> On Behalf Of 
Ed Kelleher
Sent: Tuesday, 12 October, 2021 2:03 PM
To: arocket@xxxxxxxxxxxxx
Subject: [AR] Re: Source of RP-1 & RP-2

Brenntag is a distributor of Exxsol D40 with a lot of locations.
They recently quoted me $1.30/lb in 55 gal drums, and they had stock in SC.

Ed Kelleher

At 05:00 AM 10/1/2021, you wrote:

Usually D40 is used because the volatility is a big part of the 
advantage of the chemical. The Exxsol and Shellsol chemicals are 
functionally identical. You don't buy it direct from the producer, they 
have distributor networks. You'll have to look around for the correct 
one. I found "Chain Oil"; they only deliver to southeast MI, but this 
is the sort of operation you should be looking for.
https://chainoil.com

If you want 25 gallons you should just buy one 55 gallon drum. It's the 
unit of commerce of small oil/solvent companies. It will keep, just 
remember to always put the caps back on after dispensing. If it's being 
stored where it can get rained on, get plastic drum covers like 
McMaster 4503T25.

On Fri, Oct 1, 2021 at 8:09 AM <willsrw@xxxxxxxxx> wrote:

Ken



RP-1 & RP-2 have much better thermal performance than  Jet-A.  Jet-A 
shouldn’t go over 300 deg F or lots of carbon depositions will build up.



I would love to get a hold of Exxon Exxsol D-80 but I can’t find a source.  
ExxonMobile Chemical does not respond to requests for quotes.  D-80 has 
great thermal performance and it’s very clean.



I worked with these type of fuels when I was at AFRL and took a liking to 
them.



Rick



From: arocket-bounce@xxxxxxxxxxxxx <arocket-bounce@xxxxxxxxxxxxx> On 
Behalf Of roxanna Mason
Sent: Friday, 1 October, 2021 12:43 AM
To: arocket@xxxxxxxxxxxxx
Subject: [AR] Re: Source of RP-1 & RP-2



Question Rick, why are you using RP-1 vs the cheaper and more available 
Jet-A or even regular kerosene?

Thanks,



Ken



On Thu, Sep 30, 2021 at 9:00 PM <willsrw@xxxxxxxxx> wrote:

Hi



I attended the North American Space Summit a month ago.  It’s in Traverse 
City, MI.  The main reason of the conference is to promote the Michigan’s 
proposal for an orbital launch facility in the Michigan’s Upper Peninsula. 
 The environmental assessment is waiting to start when the spaceport 
licensing procedure starts officially.



While there I got some information about a company, Gage Products.  They are 
just north of Detroit.  (gageproducts.com).  Their fuels page 
(https://www.gageproducts.com/aviation-aerospace-fuels/) says they will sale 
1 to 30K gallons.



I have an email requesting a quote for 25 gallons.  I live in Ohio, so I can 
pick it up myself.  I’ll let you know when I get more information.



Rick Wills

Dayton, Ohio




Other related posts: