[gps-talkusers] Re: CREATING A USER POI
- From: "Chris Grabowski" <chris@xxxxxxxxxxxxxxxx>
- To: gps-talkusers@xxxxxxxxxxxxx
- Date: Wed, 19 Jun 2013 05:32:40 -0400
Is this 2013 that you are using? Remember with 2012 and 2013 the user.pdb file
is not located in maps, it is located in sharedPOIs.
----- Original Message -----
From: "Richard Bartholomew" <richard_bartholomew@xxxxxxxxxxxxxxxx>
To: <gps-talkusers@xxxxxxxxxxxxx>
Date: Wed, 19 Jun 2013 10:27:59 +0100
Subject: [gps-talkusers] Re: CREATING A USER POI
> Hi,
>
> Thanks for the suggestions but, unfortunately, I don't have a user.pdb file
> as one has never been created by the process. I have tried creating an
> empty file to see if this would help but it doesn't! Also, my initials are
> in the author field, ie rlb.
>
> Regards
> Richard Bartholomew
>
> -----Original Message-----
> From: gps-talkusers-bounce@xxxxxxxxxxxxx
> [mailto:gps-talkusers-bounce@xxxxxxxxxxxxx] On Behalf Of Chris Grabowski
> Sent: 19 June 2013 10:25
> To: gps-talkusers@xxxxxxxxxxxxx
> Subject: [gps-talkusers] Re: CREATING A USER POI
>
> Hi,
> Try and rename your user.pdb file and try again, perhaps it is bad.
> Also make sure your POI author name is set correctly. IE it has
> characters and isn't just a space.
>
>
> On 6/18/2013 1:07 PM, Richard Bartholomew wrote:
> > Hi, Mike
> >
> >
> >
> > Thanks for reply and hope you have a great day zip lining - sounds like
> some
> > good fun!
> >
> >
> >
> > Yes, I have tried creating a POI without adding media but still get the
> same
> > results, I'm afraid.
> >
> >
> >
> > Regards
> >
> > Richard Bartholomew
> >
> >
> >
> >
> >
> > From: gps-talkusers-bounce@xxxxxxxxxxxxx
> > [mailto:gps-talkusers-bounce@xxxxxxxxxxxxx] On Behalf Of Michael May
> > Sent: 18 June 2013 18:03
> > To: gps-talkusers@xxxxxxxxxxxxx
> > Subject: [gps-talkusers] Re: CREATING A USER POI
> >
> >
> >
> > Richard,
> >
> > Have you been able to create a user POI without media? Normally, one
> presses
> > Space with dot 3, enter the name and category and click through to finish.
> > If you want to add a media clip, you can do so on the BrailleNote but not
> > the Braille Sense. Also, to change the category on the Braille Sense from
> > User Private to Public or another category like Restaurant, you need to
> use
> > the Modify button after the Point is originally created.
> >
> >
> >
> >
> >
> > The User.pdb file will be created once you record your first point. Then
> > remember to use Sendero Maps to share your points with others.
> >
> >
> >
> > Off to do some zip lining today.
> >
> >
> >
> > Mike
> >
> >
> >
> > From: gps-talkusers-bounce@xxxxxxxxxxxxx
> > [mailto:gps-talkusers-bounce@xxxxxxxxxxxxx] On Behalf Of Richard
> Bartholomew
> > Sent: Tuesday, June 18, 2013 11:46 AM
> > To: gps-talkusers@xxxxxxxxxxxxx
> > Subject: [gps-talkusers] CREATING A USER POI
> >
> >
> >
> > Hi,
> >
> >
> >
> > For various reasons, I've been virtually housebound for the past few
> months
> > and, so, have not had the need to do this but, over the past week, I have
> > been trying but without success! I am using version 2013.3, Build 499 on
> an
> > Apex BT32.
> >
> >
> >
> > I appear to be following the steps laid out in the manual but every time I
> > get to the final one, ie "Add Media File", and hit enter on either "None"
> > (my preference) or "Description", I get the message "operation cancelled"!
> > I have tried this numerous times (including after reboots) but still the
> > same problem.
> >
> >
> >
> > The user.pdb file does not exist anywhere and definitely not in my default
> > directory for maps and POIs. The storage device I'm using is not
> > write-protected and I have been able to create files on it via other
> means.
> >
> >
> >
> > Anyone got any ideas, please, as I know I'll be doing something
> > fundamentally and stupidly wrong!
> >
> >
> >
> > Thanks in anticipation.
> >
> >
> >
> > Richard Bartholomew
> >
> >
> >
> > _____
> >
> > No virus found in this message.
> > Checked by AVG - www.avg.com
> > Version: 2013.0.3345 / Virus Database: 3199/6419 - Release Date: 06/17/13
> >
> >
>
> --
> Twitter: MysticAccess
>
> To change your email settings (unsubscribe, digest only, or vacation mode):
> http://senderogroup.com/social_media/email.htm
>
> Additionally, to unsubscribe send an email to
> gps-talkusers-request@xxxxxxxxxxxxx with "unsubscribe" in the Subject.
>
> To change your email settings (unsubscribe, digest only, or vacation mode):
> http://senderogroup.com/social_media/email.htm
>
> Additionally, to unsubscribe send an email to
> gps-talkusers-request@xxxxxxxxxxxxx with "unsubscribe" in the Subject.
>
>
To change your email settings (unsubscribe, digest only, or vacation mode):
http://senderogroup.com/social_media/email.htm
Additionally, to unsubscribe send an email to
gps-talkusers-request@xxxxxxxxxxxxx with "unsubscribe" in the Subject.
Other related posts: