[gps-talkusers] Re: change the message of identification
- From: Martín Murillo - COASIN SA <martin.murillo@xxxxxxxxxxxxx>
- To: <gps-talkusers@xxxxxxxxxxxxx>
- Date: Wed, 22 Oct 2008 15:55:56 -0200
Dear Charles:
Thank your for your fast answer.
I have a portable analyzer that after each measurement, it takes the
information from a GPS via bluetooth.
I have a GPS Holux m-1000. When the instrument detects the GPS, the message
at the display (on the analyzer) says "Holux_m-1000".
When I perform the analysis, the analyzer does not take the GPS data.
I have talked to Thermo Fisher Scientific (the analyzer´s manufacturers) and
they suggested me to change the message that appears in the GPS from Holux
m-1000 to GPS only. Is this possible?
If you have any doubts yet, please let me know.
Regards,
Martín
----- Original Message -----
From: "Charles LaPierre" <charles@xxxxxxxxxxxxxxxx>
To: <gps-talkusers@xxxxxxxxxxxxx>
Sent: Wednesday, October 22, 2008 11:51 AM
Subject: [gps-talkusers] Re: change the message of identification
Hello Martin,
What do you mean you have an instrument that needs it to say GPS instead
of m-1000? what Instrument?
exactly when do you want the system to say GPS instead of Holux m-1000?
Why does it matter anyways this is just the name of the receiver so you
know which receiver you are connected to.
Thanks
Charles.
At 06:45 AM 10/22/2008, you wrote:
Hello everyone,
Can someone please tell me the way to change the message of identification
in my HOLUX m-1000?.
I have an instrument that needs that the GPS message says GPS instead of
m-1000 how it actually says.
Many thanks in advance.
Best regards,
Martin
Charles M. La Pierre
CTO Sendero Group
"The GPS company." Distributors of the mPower, PK, Victor Stream, Voice
Sense, KNFB Mobile Reader, Talks, Miniguide and ID Mate
1-888-757-6810
Lat. 37 15' 25" N Lon: 121 53' 04" W
.
Other related posts: