[gps-talkusers] Re: change the message of identification
- From: Martín Murillo - COASIN SA <martin.murillo@xxxxxxxxxxxxx>
- To: <gps-talkusers@xxxxxxxxxxxxx>
- Date: Wed, 22 Oct 2008 17:10:52 -0200
Derar Charles,
Many thks for your answer.
I´ll contact with HOLUX.
Best regards.
----- Original Message -----
From: "Charles LaPierre" <charles@xxxxxxxxxxxxxxxx>
To: <gps-talkusers@xxxxxxxxxxxxx>
Sent: Wednesday, October 22, 2008 4:12 PM
Subject: [gps-talkusers] Re: change the message of identification
Are you talking about the Sendero GPS product or
do you mean when you go to bluetooth connectivity
inside Keysoft? If you mean the connectivity
options menu of Keysoft that is communicating
directly with the GPS receiver and we have no
control over what the receiver says its name is.
You could instead using the Sendero GPS software
and start creating a Replay file which is a text
file that has all data received from the GPS
receiver saved to a file, then if you can send
that file to the analyzer it may work that way instead of through bluetooth.
Thanks
Charles.
At 10:55 AM 10/22/2008, you wrote:
Dear Charles:
Thank your for your fast answer.
I have a portable analyzer that after each measurement, it takes the
information from a GPS via bluetooth.
I have a GPS Holux m-1000. When the instrument detects the GPS, the message
at the display (on the analyzer) says "Holux_m-1000".
When I perform the analysis, the analyzer does not take the GPS data.
I have talked to Thermo Fisher Scientific (the analyzer´s manufacturers)
and they suggested me to change the message that appears in the GPS from
Holux m-1000 to GPS only. Is this possible?
If you have any doubts yet, please let me know.
Regards,
Martín
----- Original Message ----- From: "Charles LaPierre"
<charles@xxxxxxxxxxxxxxxx>
To: <gps-talkusers@xxxxxxxxxxxxx>
Sent: Wednesday, October 22, 2008 11:51 AM
Subject: [gps-talkusers] Re: change the message of identification
Hello Martin,
What do you mean you have an instrument that needs it to say GPS instead
of m-1000? what Instrument?
exactly when do you want the system to say GPS instead of Holux m-1000?
Why does it matter anyways this is just the name of the receiver so you
know which receiver you are connected to.
Thanks
Charles.
At 06:45 AM 10/22/2008, you wrote:
Hello everyone,
Can someone please tell me the way to change the message of
identification in my HOLUX m-1000?.
I have an instrument that needs that the GPS message says GPS instead of
m-1000 how it actually says.
Many thanks in advance.
Best regards,
Martin
Charles M. La Pierre
CTO Sendero Group
"The GPS company." Distributors of the mPower, PK, Victor Stream, Voice
Sense, KNFB Mobile Reader, Talks, Miniguide and ID Mate
1-888-757-6810
Lat. 37 15' 25" N Lon: 121 53' 04" W
.
Charles M. La Pierre
CTO Sendero Group
"The GPS company." Distributors of the mPower,
PK, Victor Stream, Voice Sense, KNFB Mobile
Reader, Talks, Miniguide and ID Mate
1-888-757-6810
Lat. 37 15' 25" N Lon: 121 53' 04" W
.
Other related posts: