[gps-talkusers] Re: change the message of identification
- From: TERRY BRAY <gtbray@xxxxxxxxxx>
- To: gps-talkusers@xxxxxxxxxxxxx
- Date: Wed, 22 Oct 2008 11:52:17 -0700 (PDT)
Charles:
I believe i understand what he is asking you. He is actually using a third
party device that intersepts the data from the gps receiver. From what i got
out of the message the problem is the receivers id code like m1000. The way i
read the message and i hope i don't confuse the issue is he wants to know
Terry Bray
System support Analyst
Owner for the Access-l Mailing list.
--- On Wed, 10/22/08, Charles LaPierre <charles@xxxxxxxxxxxxxxxx> wrote:
> From: Charles LaPierre <charles@xxxxxxxxxxxxxxxx>
> Subject: [gps-talkusers] Re: change the message of identification
> To: gps-talkusers@xxxxxxxxxxxxx
> Received: Wednesday, October 22, 2008, 6:12 PM
> Are you talking about the Sendero GPS product or
> do you mean when you go to bluetooth connectivity
> inside Keysoft? If you mean the connectivity
> options menu of Keysoft that is communicating
> directly with the GPS receiver and we have no
> control over what the receiver says its name is.
>
> You could instead using the Sendero GPS software
> and start creating a Replay file which is a text
> file that has all data received from the GPS
> receiver saved to a file, then if you can send
> that file to the analyzer it may work that way instead of
> through bluetooth.
>
> Thanks
> Charles.
>
> At 10:55 AM 10/22/2008, you wrote:
> >Dear Charles:
> >
> >Thank your for your fast answer.
> >I have a portable analyzer that after each
> >measurement, it takes the information from a GPS via
> bluetooth.
> >I have a GPS Holux m-1000. When the instrument
> >detects the GPS, the message at the display (on
> >the analyzer) says "Holux_m-1000".
> >
> >When I perform the analysis, the analyzer does not take
> the GPS data.
> >
> >I have talked to Thermo Fisher Scientific (the
> >analyzer´s manufacturers) and they suggested me
> >to change the message that appears in the GPS
> >from Holux m-1000 to GPS only. Is this possible?
> >
> >If you have any doubts yet, please let me know.
> >
> >Regards,
> >Martín
> >
> >----- Original Message ----- From: "Charles
> >LaPierre" <charles@xxxxxxxxxxxxxxxx>
> >To: <gps-talkusers@xxxxxxxxxxxxx>
> >Sent: Wednesday, October 22, 2008 11:51 AM
> >Subject: [gps-talkusers] Re: change the message of
> identification
> >
> >
> >>Hello Martin,
> >>What do you mean you have an instrument that
> >>needs it to say GPS instead of m-1000? what
> Instrument?
> >>exactly when do you want the system to say GPS
> >>instead of Holux m-1000? Why does it matter
> >>anyways this is just the name of the receiver
> >>so you know which receiver you are connected to.
> >>
> >>Thanks
> >>Charles.
> >>
> >>At 06:45 AM 10/22/2008, you wrote:
> >>>Hello everyone,
> >>>
> >>>Can someone please tell me the way to change
> >>>the message of identification in my HOLUX
> m-1000?.
> >>>I have an instrument that needs that the GPS
> >>>message says GPS instead of m-1000 how it
> actually says.
> >>>
> >>>Many thanks in advance.
> >>>
> >>>Best regards,
> >>>
> >>>Martin
> >>
> >>Charles M. La Pierre
> >>CTO Sendero Group
> >>"The GPS company." Distributors of the
> mPower,
> >>PK, Victor Stream, Voice Sense, KNFB Mobile
> >>Reader, Talks, Miniguide and ID Mate
> >>1-888-757-6810
> >>
> >>Lat. 37 15' 25" N Lon: 121 53'
> 04" W
> >>
> >>
> >>
> >>.
> >>
> >
>
> Charles M. La Pierre
> CTO Sendero Group
> "The GPS company." Distributors of the mPower,
> PK, Victor Stream, Voice Sense, KNFB Mobile
> Reader, Talks, Miniguide and ID Mate
> 1-888-757-6810
>
> Lat. 37 15' 25" N Lon: 121 53' 04" W
Other related posts: