Ok start at the start menu which is main menu when you turn the machine on. Before we get into the bluetooth, go intothe utilities menu and press enter. type m for miscelaneous list and press enter. You will be asked Active Sync connection and press B. for Bluetooth. Exit out of this menu by pressing the main menu key. Turn on your receiver. NowPress alt o. That gets you into the options menu. Now press c. that brings up the connectivity menu. Now press b for bluetooth. Your Braille Note should ask "Bluetooth On?" and if it says No, press y for yes. Press enter and it will ask "Search for devices?" Press y for yes and it will tell you it is searching for devices and begin beeping. When it stops it should say List of bluetooth devices. Arrow down and it should say whatever the name of your receiver is. Now, Press enter on the name of your bluetooth receiver and it will say List of services for xxx meaning whatever your receiver is. Down arrow to active sync and press enter on this setting. You will be asked Pair with whatever your receiver is and activate active sync? Press y for yes. Now. it will ask you for an authentication code. type 0000 and press enter. You should hear the message Paired with whatever your receiver is active sync active. Now, Go into the gps program. Press n for this. press o and g. Here is your receiver types list. Press b for bluetooth. Now it will say select the bluetooth receiver and if it is paired properly, it will come right up. Hope this helps. Mary Ellen Earls ----- Original Message ----- From: Robert To: gps-talkusers@xxxxxxxxxxxxx Sent: Sunday, June 01, 2008 12:08 PM Subject: [gps-talkusers] paring Another question, how do I pair my receiver with the QT?