[gps-talkusers] Re: paring
- From: Kevin Chao <kevinchao89@xxxxxxxxx>
- To: <gps-talkusers@xxxxxxxxxxxxx>
- Date: Sun, 1 Jun 2008 13:19:51 -0700
I have just one minor correction, it is Function with O to get into the
KeySoft Options menu.
A tip, it is no longer required to type in the 0000 on the PK and mPower
with KeySoft 7.5 and later.
Thanks,
Kevin
I would encourage you to visit the Chaos World of Assistive Technology Blog
at:
http://www.chaosat.wordpress.com/
Postings are dealing with the latest and greatest happenings, tips and
tricks and other items of interest.
_____
From: gps-talkusers-bounce@xxxxxxxxxxxxx
[mailto:gps-talkusers-bounce@xxxxxxxxxxxxx] On Behalf Of Mary Ellen Earls
Sent: Sunday, June 01, 2008 1:11 PM
To: gps-talkusers@xxxxxxxxxxxxx
Subject: [gps-talkusers] Re: paring
Ok start at the start menu which is main menu when you turn the machine on.
Before we get into the bluetooth, go intothe utilities menu and press enter.
type m for miscelaneous list and press enter.
You will be asked Active Sync connection and press B. for Bluetooth.
Exit out of this menu by pressing the main menu key.
Turn on your receiver.
NowPress alt o.
That gets you into the options menu.
Now press c. that brings up the connectivity menu.
Now press b for bluetooth.
Your Braille Note should ask "Bluetooth On?" and if it says No, press y for
yes.
Press enter and it will ask "Search for devices?" Press y for yes and it
will tell you it is searching for devices and begin beeping.
When it stops it should say List of bluetooth devices.
Arrow down and it should say whatever the name of your receiver is.
Now, Press enter on the name of your bluetooth receiver and it will say List
of services for xxx meaning whatever your receiver is.
Down arrow to active sync and press enter on this setting. You will be asked
Pair with whatever your receiver is and activate active sync? Press y for
yes. Now. it will ask you for an authentication code. type 0000 and press
enter. You should hear the message Paired with whatever your receiver is
active sync active.
Now, Go into the gps program.
Press n for this. press o and g. Here is your receiver types list. Press b
for bluetooth. Now it will say select the bluetooth receiver and if it is
paired properly, it will come right up.
Hope this helps. Mary Ellen Earls
----- Original Message -----
From: Robert <mailto:robertantunez@xxxxxxxxxxx>
To: gps-talkusers@xxxxxxxxxxxxx
Sent: Sunday, June 01, 2008 12:08 PM
Subject: [gps-talkusers] paring
Another question, how do I pair my receiver with the QT?
No virus found in this incoming message.
Checked by AVG.
Version: 8.0.100 / Virus Database: 269.24.4/1476 - Release Date: 5/31/2008
12:25 PM
Other related posts: