Hello Steve, no, you can just hit enter. when you hit enter it should say receiver name pared and active. Hope this helps. Chris On Mon, 2 Jun 2008 10:50:10 -0400, "Steve" <drum67-72@xxxxxxxxxxxxx> wrote: >Hmmm, it isn't necessary to type the authentication code? I had to do that a >couple weeks ago after resetting my PK with version 7.5 build 27 and hardware >revision 2 running Windows CE 4.2. >----- Original Message ----- >From: "Kevin Chao" <kevinchao89@xxxxxxxxx> >To: <gps-talkusers@xxxxxxxxxxxxx> >Sent: Sunday, June 01, 2008 4:19 PM >Subject: [gps-talkusers] Re: paring > > >I have just one minor correction, it is Function with O to get into the >KeySoft Options menu. > >A tip, it is no longer required to type in the 0000 on the PK and mPower >with KeySoft 7.5 and later. > >Thanks, > >Kevin >I would encourage you to visit the Chaos World of Assistive Technology Blog >at: >http://www.chaosat.wordpress.com/ >Postings are dealing with the latest and greatest happenings, tips and >tricks and other items of interest. > > > _____ > >From: gps-talkusers-bounce@xxxxxxxxxxxxx >[mailto:gps-talkusers-bounce@xxxxxxxxxxxxx] On Behalf Of Mary Ellen Earls >Sent: Sunday, June 01, 2008 1:11 PM >To: gps-talkusers@xxxxxxxxxxxxx >Subject: [gps-talkusers] Re: paring > > >Ok start at the start menu which is main menu when you turn the machine on. >Before we get into the bluetooth, go intothe utilities menu and press enter. > type m for miscelaneous list and press enter. >You will be asked Active Sync connection and press B. for Bluetooth. >Exit out of this menu by pressing the main menu key. >Turn on your receiver. >NowPress alt o. >That gets you into the options menu. >Now press c. that brings up the connectivity menu. >Now press b for bluetooth. > Your Braille Note should ask "Bluetooth On?" and if it says No, press y for >yes. >Press enter and it will ask "Search for devices?" Press y for yes and it >will tell you it is searching for devices and begin beeping. >When it stops it should say List of bluetooth devices. >Arrow down and it should say whatever the name of your receiver is. >Now, Press enter on the name of your bluetooth receiver and it will say List >of services for xxx meaning whatever your receiver is. >Down arrow to active sync and press enter on this setting. You will be asked >Pair with whatever your receiver is and activate active sync? Press y for >yes. Now. it will ask you for an authentication code. type 0000 and press >enter. You should hear the message Paired with whatever your receiver is >active sync active. >Now, Go into the gps program. >Press n for this. press o and g. Here is your receiver types list. Press b >for bluetooth. Now it will say select the bluetooth receiver and if it is >paired properly, it will come right up. >Hope this helps. Mary Ellen Earls > >----- Original Message ----- >From: Robert <mailto:robertantunez@xxxxxxxxxxx> >To: gps-talkusers@xxxxxxxxxxxxx >Sent: Sunday, June 01, 2008 12:08 PM >Subject: [gps-talkusers] paring > >Another question, how do I pair my receiver with the QT? > >No virus found in this incoming message. >Checked by AVG. >Version: 8.0.100 / Virus Database: 269.24.4/1476 - Release Date: 5/31/2008 >12:25 PM > > > > > > >__________ Information from ESET Smart Security, version of virus signature >database 3152 (20080602) __________ > >The message was checked by ESET Smart Security. > >http://www.eset.com > Chris Grabowski - Customer Support and Product testing Sendero Group "The GPS company." Also, distributors of the mPower, PK, Victor Stream, Voice Sense, KNFB Mobile Reader, Talks, Miniguide and ID Mate Phone: 888-757-6810 EXT. 113 Email: chris@xxxxxxxxxxxxxxxx