Hi. I think I got it. I just put in the street I wanted it to intersect with and was just looking around at pois to go from the drop off point by bus to the poi which was an address. I had just wanted a different cross street than the ones presented since I'm not familiar with them. so just took a chance and put in the one that I know is near there and still got what I wanted. ----- Original Message ----- From: "Charles LaPierre" <charles@xxxxxxxxxxxxxxxx>
To: <gps-talkusers@xxxxxxxxxxxxx> Sent: Wednesday, October 22, 2008 5:14 PM Subject: [gps-talkusers] Re: picking cross streets
Hi Tina, We need a little more information than this in order to help you. Was this a route you created from a replay, or a vehicle or pedestrian route, or a route you created manually? What are you expecting and what did the system create? Thanks Charles. At 05:05 PM 10/22/2008, you wrote:Hi. I'm trying to look at a route in gps, but it isn't giving me the cross street I need. Can I override the system somehogw and tell it what I need or how do I go about this:? ----- Original Message ----- From: "Martín Murillo - COASIN SA" <martin.murillo@xxxxxxxxxxxxx> To: <gps-talkusers@xxxxxxxxxxxxx> Sent: Wednesday, October 22, 2008 12:10 PM Subject: [gps-talkusers] Re: change the message of identificationDerar Charles, Many thks for your answer. I´ll contact with HOLUX. Best regards. ----- Original Message ----- From: "Charles LaPierre" <charles@xxxxxxxxxxxxxxxx> To: <gps-talkusers@xxxxxxxxxxxxx> Sent: Wednesday, October 22, 2008 4:12 PM Subject: [gps-talkusers] Re: change the message of identification Are you talking about the Sendero GPS product or do you mean when you go to bluetooth connectivity inside Keysoft? If you mean the connectivity options menu of Keysoft that is communicating directly with the GPS receiver and we have no control over what the receiver says its name is. You could instead using the Sendero GPS software and start creating a Replay file which is a text file that has all data received from the GPS receiver saved to a file, then if you can sendthat file to the analyzer it may work that way instead of through bluetooth.Thanks Charles. At 10:55 AM 10/22/2008, you wrote:Dear Charles: Thank your for your fast answer. I have a portable analyzer that after each measurement, it takes the information from a GPS via bluetooth.I have a GPS Holux m-1000. When the instrument detects the GPS, the messageat the display (on the analyzer) says "Holux_m-1000". When I perform the analysis, the analyzer does not take the GPS data. I have talked to Thermo Fisher Scientific (the analyzer´s manufacturers) and they suggested me to change the message that appears in the GPS from Holux m-1000 to GPS only. Is this possible? If you have any doubts yet, please let me know. Regards, Martín ----- Original Message ----- From: "Charles LaPierre" <charles@xxxxxxxxxxxxxxxx> To: <gps-talkusers@xxxxxxxxxxxxx> Sent: Wednesday, October 22, 2008 11:51 AM Subject: [gps-talkusers] Re: change the message of identificationHello Martin,What do you mean you have an instrument that needs it to say GPS insteadof m-1000? what Instrument? exactly when do you want the system to say GPS instead of Holux m-1000? Why does it matter anyways this is just the name of the receiver so you know which receiver you are connected to. Thanks Charles. At 06:45 AM 10/22/2008, you wrote:Hello everyone, Can someone please tell me the way to change the message of identification in my HOLUX m-1000?.I have an instrument that needs that the GPS message says GPS instead ofm-1000 how it actually says. Many thanks in advance. Best regards, MartinCharles M. La Pierre CTO Sendero Group "The GPS company." Distributors of the mPower, PK, Victor Stream, Voice Sense, KNFB Mobile Reader, Talks, Miniguide and ID Mate 1-888-757-6810 Lat. 37 15' 25" N Lon: 121 53' 04" W .Charles M. La Pierre CTO Sendero Group "The GPS company." Distributors of the mPower, PK, Victor Stream, Voice Sense, KNFB Mobile Reader, Talks, Miniguide and ID Mate 1-888-757-6810 Lat. 37 15' 25" N Lon: 121 53' 04" W .-------------------------------------------------------------------------------- No virus found in this incoming message. Checked by AVG - http://www.avg.com Version: 8.0.175 / Virus Database: 270.8.2/1739 - Release Date: 10/22/2008 7:23 AM No virus found in this outgoing message. Checked by AVG - http://www.avg.com Version: 8.0.175 / Virus Database: 270.8.2/1739 - Release Date: 10/22/2008 7:23 AMCharles M. La Pierre CTO Sendero Group "The GPS company." Distributors of the mPower, PK, Victor Stream, Voice Sense, KNFB Mobile Reader, Talks, Miniguide and ID Mate 1-888-757-6810 Lat. 37 15' 25" N Lon: 121 53' 04" W
-------------------------------------------------------------------------------- No virus found in this incoming message. Checked by AVG - http://www.avg.comVersion: 8.0.175 / Virus Database: 270.8.2/1739 - Release Date: 10/22/2008 7:23 AM
No virus found in this outgoing message. Checked by AVG - http://www.avg.com Version: 8.0.175 / Virus Database: 270.8.2/1739 - Release Date: 10/22/2008 7:23 AM