i have installed fc7 on my system, it is lenovo 3000H series..
80 GB hard disk, 256 MB ram, 32 MB video ram,
Its actually AIGLX, and monitor is LCD TFT 15inch
i m not able to get 3d effects in my system, so i thought of installing
beryl in my system...
almost half the work is complete,...
except the settings everything i have installed...
its beryl 0.2.0 when i go to beryl manager
its just white screen... the cubes are rotating but its just white...
when i install the beryl-setting-bindings-0.2.0
i get this after configuring
[root@localhost beryl-settings-bindings-0.2.0]# make
make all-recursive
make[1]: Entering directory `/root/Download/beryl-0.2.0 /beryl-
settings-bindings-0.2.0'
Making all in python
make[2]: Entering directory `/root/Download/beryl-0.2.0/beryl-
settings-bindings-0.2.0/python'
make[2]: Nothing to be done for `all'.
make[2]: Leaving directory `/root/Download/beryl- 0.2.0/beryl-
settings-bindings-0.2.0/python'
make[2]: Entering directory `/root/Download/beryl-0.2.0/beryl-
settings-bindings-0.2.0'
make[2]: Leaving directory `/root/Download/beryl-0.2.0/beryl-
settings-bindings-0.2.0 '
make[1]: Leaving directory `/root/Download/beryl-0.2.0/beryl-
settings-bindings-0.2.0'
[root@localhost beryl-settings-bindings-0.2.0]# make install
Making install in python
make[1]: Entering directory `/root/Download/beryl- 0.2.0/beryl-
settings-bindings-0.2.0/python'
make[2]: Entering directory `/root/Download/beryl-0.2.0/beryl-
settings-bindings-0.2.0/python'
make[2]: Nothing to be done for `install-exec-am'.
test -z "/usr/local/lib/python2.5/site-packages" || mkdir -p --
"/usr/local/lib/python2.5/site-packages"
/bin/sh ../libtool --mode=install /usr/bin/install -c 'berylsettings.la'
'/usr/local/lib/python2.5/site-packages/berylsettings.la'
/usr/bin/install -c .libs/berylsettings.so
/usr/local/lib/python2.5/site-packages/berylsettings.so
/usr/bin/install -c .libs/berylsettings.lai
/usr/local/lib/python2.5/site-packages/berylsettings.la
/usr/bin/install -c .libs/berylsettings.a
/usr/local/lib/python2.5/site-packages/berylsettings.a
chmod 644 /usr/local/lib/python2.5/site-packages/berylsettings.a
ranlib /usr/local/lib/python2.5/site-packages/berylsettings.a
PATH="$PATH:/sbin" ldconfig -n /usr/local/lib/python2.5/site-packages
----------------------------------------------------------------------
Libraries have been installed in:
/usr/local/lib/python2.5/site-packages
If you ever happen to want to link against installed libraries
in a given directory, LIBDIR, you must either use libtool, and
specify the full pathname of the library, or use the `-LLIBDIR'
flag during linking and do at least one of the following:
- add LIBDIR to the `LD_LIBRARY_PATH' environment variable
during execution
- add LIBDIR to the `LD_RUN_PATH' environment variable
during linking
- use the `-Wl,--rpath -Wl,LIBDIR' linker flag
- have your system administrator add LIBDIR to `/etc/ld.so.conf'
See any operating system documentation about shared libraries for
more information, such as the ld(1) and ld.so(8) manual pages.
----------------------------------------------------------------------
make[2]: Leaving directory `/root/Download/beryl- 0.2.0/beryl-
settings-bindings-0.2.0/python'
make[1]: Leaving directory `/root/Download/beryl-0.2.0/beryl-
settings-bindings-0.2.0/python'
make[1]: Entering directory `/root/Download/beryl-0.2.0/beryl-
settings-bindings-0.2.0 '
make[2]: Entering directory `/root/Download/beryl-0.2.0/beryl-
settings-bindings-0.2.0'
make[2]: Nothing to be done for `install-exec-am'.
test -z "/usr/local/lib/pkgconfig" || mkdir -p -- "/usr/local/lib/pkgconfig"
/usr/bin/install -c -m 644 'beryl-settings-bindings.pc'
'/usr/local/lib/pkgconfig/beryl-settings-bindings.pc'
make[2]: Leaving directory `/root/Download/beryl-0.2.0/beryl-
settings-bindings-0.2.0'
make[1]: Leaving directory `/root/Download/beryl-0.2.0/beryl-
settings-bindings-0.2.0'
[root@localhost beryl-settings-bindings-0.2.0]# [root@localhost
beryl-settings-bindings-0.2.0]# make
bash: [root@localhost : command not found
[root@localhost beryl-settings-bindings-0.2.0]# make all-recursive
Making all in python
make[1]: Entering directory `/root/Download/beryl-0.2.0/beryl-
settings-bindings-0.2.0/python'
make[1]: Nothing to be done for `all'.
make[1]: Leaving directory `/root/Download/beryl-0.2.0/beryl-
settings-bindings-0.2.0/python'
make[1]: Entering directory `/root/Download/beryl-0.2.0/beryl-
settings-bindings-0.2.0'
make[1]: Leaving directory `/root/Download/beryl- 0.2.0/beryl-
settings-bindings-0.2.0'
[root@localhost beryl-settings-bindings-0.2.0]#
what am I supposed to do now?