[slikom] Re: Dvije zvucne karte
- From: "Slobodan" <freedomd@xxxxxxxx>
- To: <slikom@xxxxxxxxxxxxx>
- Date: Wed, 22 Feb 2006 20:22:50 +0100
Caos,
kod mene od verzije 6 nije potreban file koji se pominje u prethodnom
mail-u. Dovoljno je samo da se u file-u jfw.ini dopise red koji se odnosi na
port i sve radi Ovu mogucnost koristim vec 2,5 godine i odlicna je..
Poz!
Slobodan
----- Original Message -----
From: "Gradimir Kragic" <bastono@xxxxxxxxx>
To: ""SliKom"" <slikom@xxxxxxxxxxxxx>
Sent: Wednesday, February 22, 2006 3:51 PM
Subject: [slikom] Dvije zvucne karte
>
> Zdravo,
>
> Sad vec postaje problem da se u prvom redu poruke upise pozdrav sa imenom
> jer je
> na listi dosta istih imena. Kao primjer navodim da su tu cetvorica Nikola,
> tri
> Igora i slicno. Pa tako ja odgovaram Marku Mirkovicu u vezi pitanja o
> dvije
> zvucne karte i razdvajanja sinteza.
> Ovo je tekst preuzet sa Freedom scientific sajta i kao sto se vidi
> prilicno je
> star. Pojavio se uz jaws 4.51 pa nisam siguran da li je ova ftp adresa
> dobra za
> download ovog fajla.
> Tekst je na Engleskom jeziku ali je ovo razumljivo pa se nadam da ces
> podesiti
> ovo sto ti treba.
>
> Gradimir
>
>
>
>
> Details of Selected Bulletin
>
> Bulletin Type: FAQ
>
> Date Posted: 04/04/2003
>
> Product Name: JAWS
>
> Version: 4.51
>
> Category: Synthesizer
>
> Question:
>
> I have two sound cards on my computer. How do I make sure JAWS uses the
> one
> I want?
>
> Answer:
>
> Many JAWS users who also use music or audio production software want JAWS
> and Eloquence to speak through one sound card, while using the other for
> their production work. To do this, you need to edit a file called JFW.ini
> and install the updated Eloquence Speech driver in the accompanying zip
> file.
>
> Editing the jfw.ini file:
>
> 1. Using My Computer or Windows Explorer, browse your hard drive to the
> currently running version of JAWS and find the jfw.ini file in that
> folder.
>
> 2. Press ENTER to open.
>
> 3. You should find some lines that read:
>
> Synth1Name=eloq
>
> Synth1LongName=Eloquence for JAWS
>
> Synth1Driver=eloq
>
> The number doesn't matter, it may be 1, 2, or 3, but it must be the same
> for
> all entries for Eloquence.
>
> 4. Add the following line after the driver line: Synth1Port=SB Live! Wave
> Device Of course, you need to make sure that the synth number matches the
> other lines, so that if the Driver line read:
>
> Sytn3Driver=eloq
>
> Then the port line would read:
>
> Synth3Port=SB Live! Wave Device
>
> The text after the = sign in the Port line comes from Control Panel/Sound
> &
> Multimedia/Audio tab It must be one of the entries that can be chosen for
> Preferred Playback device.
>
> 5. Save your changes and exit Notepad.
>
> Now you must install the updated driver.As long as JAWS is running and
> speaking through Eloquence, eloq.jls cannot be simply overwritten when
> unzipping the file. You will need to switch to NoSpeech or MS SAPI to get
> the eloq.jls to overwrite properly.
>
> 1. Download the file from
>
> ftp://ftp.freedomscientific.com/users/hj/private/eloq.zip
>
> 2. Unzip the zip file into the root of the active JAWS directory where you
> made the change to the jfw.ini file.
>
> 3. Restart JAWS and it should now be speaking from the sound card you
> wanted.
>
> 4. If not, make sure the entries are correct in the jfw.ini file and that
> your sound card is indeed installed correctly. Most audio and music
> production software allows you to select a sound device for it as well, so
> it can use one sound card while JAWS uses another.
>
>
>
> Za prijavu na ovu listu poslati poruku na adresu:
> slikom-request@xxxxxxxxxxxxx i u polju za tekst upisati, subscribe
> Za odjavu sa ove liste poslati poruku na adresu:
> slikom-request@xxxxxxxxxxxxx i u polju za tekst upisati, unsubscribe
Za prijavu na ovu listu poslati poruku na adresu:
slikom-request@xxxxxxxxxxxxx i u polju za tekst upisati, subscribe
Za odjavu sa ove liste poslati poruku na adresu:
slikom-request@xxxxxxxxxxxxx i u polju za tekst upisati, unsubscribe
Other related posts: