That's what rc5 is all about.
OK, stand up the person who was doing the 'home' function... Oh, that was me!
Id forgotten to allow for the *fundamental* in harmonics always homing to max
while the rest home to min :(
The virtual keyboard 'controller' was sending the correct home value but not
showing it correctly.
I'd also forgotten to update the incoming CC in vector control. When enabling,
it now only sets CC14 if you don't enter a valid number.
While looking at this I took the opportunity to make all forms of vector
control setting consistent, whether you do so via NRPNs, CLI or GUI.
When you set the X or Y incoming CCs the number of available parts is always
increased if it's not high enough. Required parts are activated and set to
listen on the base channel (they may have previously be set differently).
Finally, I've slightly modified the slider and rotary knob behaviour.
On both, right mouse click/drag *only* sets the home position. Later I want to
extend this for midi learn operations so don't want any confusion.
Mouse wheel and drag give very similar behaviour on knobs with Left & Middle
buttons, and the CTRL key.
Sliders more-or-less match this with the scroll wheel, but getting incremental
drags has proved to be elusive! It will have to wait.
Unless something dramatic turns up over the weekend, I'll let the Diamond Dove
out of it's cage on Monday :)
Hmm, maybe I should spend the 'spare' time updating some notes :(
--
Will J Godfrey
http://www.musically.me.uk
Say you have a poem and I have a tune.
Exchange them and we can both have a poem, a tune, and a song.
Yoshimi source code is available from either:
http://sourceforge.net/projects/yoshimi
Or: https://github.com/Yoshimi/yoshimi
Our list archive is at: https://www.freelists.org/archive/yoshimi
To post, email to yoshimi@xxxxxxxxxxxxx