[access-uk] Re: K1000 PROBLEM
- From: "Steve Nutt" <steve@xxxxxxxxxxxxxx>
- To: <access-uk@xxxxxxxxxxxxx>
- Date: Wed, 8 Nov 2006 08:00:36 -0000
Hi Simon,
I somehow doubt that what you say will cure the problem. From what Pele is
saying, if I understand her right, she gets the error when Audio Spooler is
reloaded. So even if she loads it manually, it will still come up with the
error. I suspect that there is a temporary file somewhere that needs
deleting, but for the life of me, I don't know what it is.
All the best
--
Computer Room Services: the long cane for blind computer users.
Telephone Low-call: 08452 606 277
International: +44(0)1438 742286,
Fax: +44(0)1438 759589
mobile: +44(0)7956 334938,
Email: mailto:Steve@xxxxxxxxxxxxxx
Web site: http://www.comproom.co.uk
-----Original Message-----
From: access-uk@xxxxxxxxxxxxx [mailto:access-uk@xxxxxxxxxxxxx] On Behalf Of
simon.dowling
Sent: 08 November 2006 03:21
To: access-uk@xxxxxxxxxxxxx
Subject: [access-uk] Re: K1000 PROBLEM
hi ok me thinks we're loosing the thread here a bit.
when you start your pc, if you go in to the run dialog box type in:
Services.msc
locate the audio spooler and right click on it, then choose end process.
then reload the service by right clicking and choose start, this should have
cleared the spooler and you should have things back to normal.
hth
----- Original Message -----
From: "kevin cussick" <kevin.cussick@xxxxxxxxxxxxxx>
To: <access-uk@xxxxxxxxxxxxx>
Sent: Tuesday, November 07, 2006 11:14 PM
Subject: [access-uk] Re: K1000 PROBLEM
> Hi,
>
> Yes Ray I would agree with You, I think it is the orpheious synth that
> causes this problem I had this problem using Hal and other programs as
> well.
>
> I remember when I used Hal with total recorder and the sound driver
> you are ment to be able to record the show you are recording and use
> your screen reader at the same time but I could not do this using the
> Orpheus synth!!!
>
> But when I used a sappy voice it worked fine but I still like producer
> all the best.
> ** To leave the list, click on the immediately-following link:-
> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
> ** If this link doesn't work then send a message to:
> ** access-uk-request@xxxxxxxxxxxxx
> ** and in the Subject line type
> ** unsubscribe
> ** For other list commands such as vacation mode, click on the
> ** immediately-following link:-
> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
> ** or send a message, to
> ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
>
>
>
** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
Other related posts: