These are great switches. Simple and reliable. Standard for my rockets.
K
Ken Biba
Novarum, Inc.
415-577-5496
On May 22, 2016, at 12:22 PM, Christopher Cotner <project941.7@xxxxxxxxx>
wrote:
For more-or-less standard HPR type rockets, something like this might be
appropriate:
http://www.fingertechrobotics.com/proddetail.php?prod=ft-mini-switch
I'm working on a small HPR (I-L) that will use one to connect the apogee
deployment charge once the rocket is vertical on the pad (will power avionics
on during vehicle assembly on the flightline to establish GPS lock). They're
super durable and tough, unlike the featherweight screw switches (the
soldered on nut can pop off if you're heavy handed, and Phillips head screws
suck) or most miniature switches from electronics stores (which don't carry
high current well).
Ordering them from Canada via DHL is an annoyance... but the CAD is free to
download, it wouldn't be hard to make your own.
On Sun, May 22, 2016 at 12:01 PM, Paul Breed <paul@xxxxxxxxxx> wrote:
I'm rebuilding the avionics bay on my box stock HPR
I use this rocket to test GPS and IMU's......
Its had about 40 flights and the avionics bay is getting tired....
I'm going to rebuild the avionics bay and was wondering what to use
as arming switches...
On Sunday Out at Far I saw someone loose a really nice rocket because
he believes his recovery arming switch failed....
I'm not real happy with the arming switches I have on this rocket....
What do people like for arming switches?
I was contemplating building some FET switches that turn On when
a jumper is removed, so the mechanical failure mode is on, not off...
Seems like unneeded added complications.....
On my Blue and silver I had no switches the Avionics were turned on by
connecting the battery.
connector....
I'm less fond of that approach when pyro charges and pressure changes from
sliding
sections together are involved....
Paul