Have enough material there to cut the AN fittings directly from the
boss?
-------- Original Message --------
Subject: [AR] Re: Connections...
From: Paul Breed <paul@xxxxxxxxxx>
Date: Tue, December 22, 2015 8:07 pm
To: arocket@xxxxxxxxxxxxx
Its made of aluminum....
How small can you get AS-5202 fittings?
I've used the 10-32 fittings and the flow path is just slightly maginal for
the fuel...
On Tue, Dec 22, 2015 at 6:19 PM, Ben Brockert <wikkit@xxxxxxxxx> wrote:
Parker has a line of male AN fittings that include a teflon seal in
the 37 degree face. I expect it's possible to print one. I haven't had
the chance to prove it yet.
Anodizing the part will help make it possible, in addition to making
the regen portion a lot easier.
On Tue, Dec 22, 2015 at 8:05 PM, Paul Breed <paul@xxxxxxxxxx> wrote:
Looking for suggestions on how to terminate fluid and pressure sensorsensor
connections in a 3D printed chamber.
The blobs of metal for the fuel connection and the chamber pressure
are significant parts of the chamber weight.and
https://pbs.twimg.com/media/CW3wUbqUAAA5Ciu.jpg:large
this is the flight weight chamber fully accounted including cat pack lid
internal parts will have a
thrust to weight of > 110
Paul
