[gps-talkusers] Re: Unable to create long route - help please
- From: Kevin Chao <kevinchao89@xxxxxxxxx>
- To: <gps-talkusers@xxxxxxxxxxxxx>
- Date: Fri, 24 Oct 2008 08:45:47 -0700
Dennis,
Yes, Itoo find the information useful as I have used it almost like a check
list to determine the issue.
Great to see that you too used it like a check list and that a no-key reset
did the trick.
A great amount of work went into making the UK English setting and
roundabouts. So, it is great to see it working so well and producing
positive results. Haha, yes, that is the correct US expression.
Kevin
-----Original Message-----
From: gps-talkusers-bounce@xxxxxxxxxxxxx
[mailto:gps-talkusers-bounce@xxxxxxxxxxxxx] On Behalf Of djden (Dennis
Freedman)
Sent: Friday, October 24, 2008 4:50 AM
To: gps-talkusers@xxxxxxxxxxxxx
Subject: [gps-talkusers] Re: Unable to create long route - help please
Hello Kevin
Thanks for all that info--very useful for the future.
The route in question was from Northern England to Southern England, so met
one of your criteria; all relevant maps were loaded.
The no-keys reset however did the trick, and I have deliberately re-created
this and other long routes to places nearby in Kensington and the problem
has not recurred.
Excellent work to all concerned, and again, the route descriptions now are
so much more understandable. Especially with the UK English language
setting turned on. Way to go Kevin (I think that's the correct American
expression?). (Grin).
> ----- Original Message -----
>From: Kevin Chao <kevinchao89@xxxxxxxxx
>To: <gps-talkusers@xxxxxxxxxxxxx
>Date sent: Thu, 23 Oct 2008 23:10:18 -0700
>Subject: [gps-talkusers] Re: Unable to create long route - help
please
>The four reasons that I can think of for why one may receive the
"Unable to
>Create Route" message are as follows:
>1. The Pedestrian or Vehicle route that is trying to be created
is outside
>of the region for the loaded map(s).
>2. The RichMap engine does not have enough memory to create the
route. This
>basically means the unit is out of memory, which is why a no-key
reset is
>recommended to free up memory.
>3. A Pedestrian route is trying to be created on a non-navigable
street,
>such as a highway.
>4. A Vehicle route is trying to be created on a non-navigable
street, such
>as a terminal for pedestrians.
>Again if a starting and ending point can be given, such as an
address, POI
>name or lat/lon would be great.
>Thanks,
>Kevin
>-----Original Message-----
>From: gps-talkusers-bounce@xxxxxxxxxxxxx
>[mailto:gps-talkusers-bounce@xxxxxxxxxxxxx] On Behalf Of Jim
Gammon
>Sent: Thursday, October 23, 2008 10:57 PM
>To: gps-talkusers@xxxxxxxxxxxxx
>Subject: [gps-talkusers] Re: Unable to create long route - help
please
>Hi, I have had similar difficulty creating even short routes
using GPS 5.0.
>The unit says unable to create route. In the past with V 4.22, I
had the
>same problems after I had been using the calculator. By doing a
simple
>reset on the unit, the problem was resolved. But I don't know
what causes
>this to happen before doing the reset. Jim
>----- Original Message -----
>From: "djden (Dennis Freedman)" <djden@xxxxxxxxxxxxxxxxx
>To: <doug@xxxxxxxxxxxxxxxxx>; <gps-talkusers@xxxxxxxxxxxxx
>Sent: Thursday, October 23, 2008 4:15 PM
>Subject: [gps-talkusers] Unable to create long route - help
please
>> Hello
>> Using the new Sendero GPS Ver 5, trying to create a vehicle
route between
>> where I live in Lancashire, NW England, to Kensington in London,
about 176
>> miles, I get the message "this is a very long route--are you
sure you wish
>> to continue?" After replying Yes, almost immediately I receive
the message
>> "unable to create route".
>> In ver 4 I had no trouble creating much longer distances. Any
help
>> welcomed, and apologies if this is covered in the manual--can
someone
>> point me to more information? (smile).
Other related posts: