I understand why you have set the PSIP values to display 23-1 and 23-2. What happens when you have to give Channel 23 back to the FCC at the end = of the transition? Will you still call "RF Channel 55" Ch 23? -----Original Message----- From: opendtv-bounce@xxxxxxxxxxxxx [mailto:opendtv-bounce@xxxxxxxxxxxxx]On Behalf Of John Shutt Sent: Monday, December 06, 2004 10:17 AM To: opendtv@xxxxxxxxxxxxx Subject: [opendtv] Re: Visit at Best Buy Ralph, We are a digital broadcaster, and with the several examples of consumer = STBs=20 we have, to a unit each one requires a complete channel scan as the = ONLY=20 way to enter a digital station. Some of the early ones will even wipe = out=20 any previously discovered stations if they happen to be off air at the = time.=20 Not very conducive to those who have to use an antenna rotor to tune in=20 different stations. However, an early generation flaw in the unit's=20 software, I grant. Telling our digital viewers we are on UHF channel 55 is meaningless to = them=20 since all the consumer will ever see is 23-1 and 23-2 as a channel = number.=20 They will never see the number 55 anywhere, they cannot enter the number = 55=20 (at least on the Samsung, Zenith, and Sony examples we have here) so why = advertise "Digital 55"? Cheers, John Shutt ----- Original Message -----=20 From: "Ralph P. Manfredo" <rmanfredo@xxxxxxxx> > Here in Silicon Valley, where we get in excess of 15-OTA TV channels, = only > one broadcaster informs the viewing public what channel number to find > digital programming. The TV channel that announces Digital on Channel = so > and so is not even one of the four top networks.=20 =20 =20 ---------------------------------------------------------------------- You can UNSUBSCRIBE from the OpenDTV list in two ways: - Using the UNSUBSCRIBE command in your user configuration settings at = FreeLists.org=20 - By sending a message to: opendtv-request@xxxxxxxxxxxxx with the word = unsubscribe in the subject line. ---------------------------------------------------------------------- You can UNSUBSCRIBE from the OpenDTV list in two ways: - Using the UNSUBSCRIBE command in your user configuration settings at FreeLists.org - By sending a message to: opendtv-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line.