Hi. The DTR-Z500 HD does include an HDMI output. As far as I know, the only difference is the different design to that of the DTR 500HD. On 11/07/2012, Ibrahim Gucukoglu <ibrahim_gucukoglu@xxxxxxxx> wrote: > Hi Elliott. > > I've been pressed by several people both on and off list to give the TVonics > > another try, so I've acquired another DTR-HD500 as I didn't want to go down > > the DTR-Z500HD route for the reason you outlined in your message. Lets just > > hope that this time I have better luck with it and the first one I had being > > faulty was just a piece of bad luck on my part. > > All the best, Ibrahim. > > -----Original Message----- > From: Elliott Barnes > Sent: Tuesday, July 10, 2012 6:58 PM > To: access-uk@xxxxxxxxxxxxx > Subject: [access-uk] Re: TVonics - Amy On Strike! > > The DTR-Z500HD does in fact include an HDMI output; John was refering > to the older DTR-Z500, which doesn't. > > On 10/07/2012, Jackie Cairns <jackie.cairnsplace@xxxxxxxxxxxxxx> wrote: >> Hi Carol >> >> She says "Good evening"? First I've heard of that, she obviously doesn't >> say it to us either then, or "Good morning", or "Good afternoon" for that >> matter, (smiles). I know when she is on because the channel jumps from >> whatever it happens to be on through the built-in Freeview or Sky to >> TVonics, and once I get that clearance, I can then go to the EPG or >> library. >> When I press the stand-by button after use, she does say "Entering >> stand-by". >> >> >> Kind Regards, >> >> Jackie Cairns >> >> -----Original Message----- >> From: access-uk@xxxxxxxxxxxxx [mailto:access-uk@xxxxxxxxxxxxx] On Behalf >> Of >> Carol Pearson >> Sent: 10 July 2012 15:05 >> To: access-uk@xxxxxxxxxxxxx >> Subject: [access-uk] Re: TVonics - Amy On Strike! >> >> Most times this works for me also, but sometimes we know we've left >> plenty >> of time and still she won't say "Good evening"! >> >> Anyway, we're just treating her with care, not rushing her and being very >> thankful we have something onto which to record - at last! >> >> Carol P >> ---- Original Message ---- >> From: "David Mellor" <mrd.mellor@xxxxxxxxxxxxx> >> To: <access-uk@xxxxxxxxxxxxx> >> Sent: Tuesday, July 10, 2012 2:46 PM >> Subject: [access-uk] Re: TVonics - Amy On Strike! >> >>> One thing I have noticed is that pressing buttons on the remote during >>> the Tvonics boot up significantly increases the likelihood of getting >>> no speech. A quick turn off >>> (standby) and on again always works for me. >>> David >>> >>> >>> -----Original Message----- >>> From: access-uk@xxxxxxxxxxxxx >>> [mailto:access-uk@xxxxxxxxxxxxx] On Behalf Of Carol Pearson >>> Sent: 07 July 2012 12:53 >>> To: Access UK Mailing List >>> Subject: [access-uk] TVonics - Amy On Strike! >>> >>> Hi all, >>> >>> We have a fairly regular saying at home which is "Amy's on strike". >>> This simply means that she fails to speak, often after booting up, >>> when we first go to use her. Of course, we find ways round, sometimes >>> needing to reboot the box again; but I wonder if anyone else is >>> finding this problem and if you have a better solution than a bit of >>> hit and miss and, finally, if you've concluded what's going on and >>> why! >>> >>> Carol P >>> >>> ** To leave the list, click on the immediately-following >>> link:- >>> ** >>> [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe] >>> ** If this link doesn't work then send a message to: >>> ** access-uk-request@xxxxxxxxxxxxx >>> ** and in the Subject line type >>> ** unsubscribe >>> ** For other list commands such as vacation mode, click on the >>> ** immediately-following link:- >>> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq] >>> ** or send a message, to >>> ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq >>> >>> >>> >>> ** To leave the list, click on the immediately-following >>> link:- >>> ** >>> [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe] >>> ** If this link doesn't work then send a message to: >>> ** access-uk-request@xxxxxxxxxxxxx >>> ** and in the Subject line type >>> ** unsubscribe >>> ** For other list commands such as vacation mode, click >>> on the >>> ** immediately-following link:- >>> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq] >>> ** or send a message, to >>> ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq >> >> ** To leave the list, click on the immediately-following link:- >> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe] >> ** If this link doesn't work then send a message to: >> ** access-uk-request@xxxxxxxxxxxxx >> ** and in the Subject line type >> ** unsubscribe >> ** For other list commands such as vacation mode, click on the >> ** immediately-following link:- >> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq] >> ** or send a message, to >> ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq >> >> ** To leave the list, click on the immediately-following link:- >> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe] >> ** If this link doesn't work then send a message to: >> ** access-uk-request@xxxxxxxxxxxxx >> ** and in the Subject line type >> ** unsubscribe >> ** For other list commands such as vacation mode, click on the >> ** immediately-following link:- >> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq] >> ** or send a message, to >> ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq >> >> > ** To leave the list, click on the immediately-following link:- > ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe] > ** If this link doesn't work then send a message to: > ** access-uk-request@xxxxxxxxxxxxx > ** and in the Subject line type > ** unsubscribe > ** For other list commands such as vacation mode, click on the > ** immediately-following link:- > ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq] > ** or send a message, to > ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq > > ** To leave the list, click on the immediately-following link:- > ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe] > ** If this link doesn't work then send a message to: > ** access-uk-request@xxxxxxxxxxxxx > ** and in the Subject line type > ** unsubscribe > ** For other list commands such as vacation mode, click on the > ** immediately-following link:- > ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq] > ** or send a message, to > ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq > > ** To leave the list, click on the immediately-following link:- ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe] ** If this link doesn't work then send a message to: ** access-uk-request@xxxxxxxxxxxxx ** and in the Subject line type ** unsubscribe ** For other list commands such as vacation mode, click on the ** immediately-following link:- ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq] ** or send a message, to ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq