[access-uk] Re: TVonics - Amy On Strike!
- From: "John Gregory" <jgm.gregory@xxxxxxxxxxxx>
- To: <access-uk@xxxxxxxxxxxxx>
- Date: Wed, 11 Jul 2012 12:08:56 +0100
Hi Elliott,
That might be the case, was justreading the customer reviews for that model
on the Amazon and one of the comments was that it did not include an HDMI
socket - mind you the review was from 2009, so it may have been upgraded
later.
John.
-----Original Message-----
From: access-uk@xxxxxxxxxxxxx [mailto:access-uk@xxxxxxxxxxxxx] On Behalf Of
Elliott Barnes
Sent: 10 July 2012 18:59
To: access-uk@xxxxxxxxxxxxx
Subject: [access-uk] Re: TVonics - Amy On Strike!
The DTR-Z500HD does in fact include an HDMI output; John was refering to the
older DTR-Z500, which doesn't.
On 10/07/2012, Jackie Cairns <jackie.cairnsplace@xxxxxxxxxxxxxx> wrote:
> Hi Carol
>
> She says "Good evening"? First I've heard of that, she obviously
> doesn't say it to us either then, or "Good morning", or "Good
> afternoon" for that matter, (smiles). I know when she is on because
> the channel jumps from whatever it happens to be on through the
> built-in Freeview or Sky to TVonics, and once I get that clearance, I
> can then go to the EPG or library.
> When I press the stand-by button after use, she does say "Entering
> stand-by".
>
>
> Kind Regards,
>
> Jackie Cairns
>
> -----Original Message-----
> From: access-uk@xxxxxxxxxxxxx [mailto:access-uk@xxxxxxxxxxxxx] On
> Behalf Of Carol Pearson
> Sent: 10 July 2012 15:05
> To: access-uk@xxxxxxxxxxxxx
> Subject: [access-uk] Re: TVonics - Amy On Strike!
>
> Most times this works for me also, but sometimes we know we've left
> plenty of time and still she won't say "Good evening"!
>
> Anyway, we're just treating her with care, not rushing her and being
> very thankful we have something onto which to record - at last!
>
> Carol P
> ---- Original Message ----
> From: "David Mellor" <mrd.mellor@xxxxxxxxxxxxx>
> To: <access-uk@xxxxxxxxxxxxx>
> Sent: Tuesday, July 10, 2012 2:46 PM
> Subject: [access-uk] Re: TVonics - Amy On Strike!
>
>> One thing I have noticed is that pressing buttons on the remote
>> during the Tvonics boot up significantly increases the likelihood of
>> getting no speech. A quick turn off
>> (standby) and on again always works for me.
>> David
>>
>>
>> -----Original Message-----
>> From: access-uk@xxxxxxxxxxxxx
>> [mailto:access-uk@xxxxxxxxxxxxx] On Behalf Of Carol Pearson
>> Sent: 07 July 2012 12:53
>> To: Access UK Mailing List
>> Subject: [access-uk] TVonics - Amy On Strike!
>>
>> Hi all,
>>
>> We have a fairly regular saying at home which is "Amy's on strike".
>> This simply means that she fails to speak, often after booting up,
>> when we first go to use her. Of course, we find ways round,
>> sometimes needing to reboot the box again; but I wonder if anyone
>> else is finding this problem and if you have a better solution than a
>> bit of hit and miss and, finally, if you've concluded what's going on
>> and why!
>>
>> Carol P
>>
>> ** To leave the list, click on the immediately-following
>> link:-
>> **
>> [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
>> ** If this link doesn't work then send a message to:
>> ** access-uk-request@xxxxxxxxxxxxx
>> ** and in the Subject line type
>> ** unsubscribe
>> ** For other list commands such as vacation mode, click on the
>> ** immediately-following link:-
>> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
>> ** or send a message, to
>> ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
>>
>>
>>
>> ** To leave the list, click on the immediately-following
>> link:-
>> **
>> [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
>> ** If this link doesn't work then send a message to:
>> ** access-uk-request@xxxxxxxxxxxxx
>> ** and in the Subject line type
>> ** unsubscribe
>> ** For other list commands such as vacation mode, click on the
>> ** immediately-following link:-
>> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
>> ** or send a message, to
>> ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
>
> ** To leave the list, click on the immediately-following link:-
> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
> ** If this link doesn't work then send a message to:
> ** access-uk-request@xxxxxxxxxxxxx
> ** and in the Subject line type
> ** unsubscribe
> ** For other list commands such as vacation mode, click on the
> ** immediately-following link:-
> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
> ** or send a message, to
> ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
>
> ** To leave the list, click on the immediately-following link:-
> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
> ** If this link doesn't work then send a message to:
> ** access-uk-request@xxxxxxxxxxxxx
> ** and in the Subject line type
> ** unsubscribe
> ** For other list commands such as vacation mode, click on the
> ** immediately-following link:-
> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
> ** or send a message, to
> ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
>
>
** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
Other related posts: