Narator doesn't get recorded. I don't understand why because you appear to hear it through the sound card (speakers just the same) but obviously it bypasses the sound card somehow. No doubt someone more technical than I am will have an answer for us! <Smiles>
-- Carol carol.pearson29@xxxxxxxxxxxxxxOn Monday, March 31, 2008 5:27 PM (UK time), Andy Collins at andy@xxxxxxxxxxxxxxxxxxx said:
Carol - Narrator is still there in Vista, and can't see why it couldn't be used in the way you have use it in XP; clearly, Goldwave doesn't record Narrator then! I assume it doesn't record system sound either? You'll have gathered that I haven't done much recording in Goldwave yet! - Andy ----- Original Message ----- From: "Carol Pearson" <carol.pearson29@xxxxxxxxxxxxxx> To: <access-uk@xxxxxxxxxxxxx> Sent: Monday, March 31, 2008 4:50 PM Subject: [access-uk] Re: VISTA and recording with GoldWaveAndy, In XP I got round the JFW problem by discovering that Narator wasn't half bad reading out the needed screen to alter sound settings, so I started to use it and found I was well pleased that I could still have some speech and unload Jaws. Never thought I'd see the day though when I opted for Narator as an option. Now, I have a funny feeling someone said that has been removed in Vista ... Must be time for another drink or two before we tackle that one ... -- Carol carol.pearson29@xxxxxxxxxxxxxx On Monday, March 31, 2008 4:39 PM (UK time), Andy Collins at andy@xxxxxxxxxxxxxxxxxxx said:Well Ray, JFW gets recorded, so unloading is required! - Andy ----- Original Message ----- From: "Ray's Home" <rays-home@xxxxxxxxxxxxxxxxxx> To: <access-uk@xxxxxxxxxxxxx> Sent: Monday, March 31, 2008 4:34 PM Subject: [access-uk] Re: VISTA and recording with GoldWaveThat's good Andy. Thinking of possible reasons why this mixer setting is disabled by default, could be to stop system sounds getting into recordings? Then again, maybe they're controled separately. Cheers, From Ray I can be contacted off-list at: mailto:ray-48@xxxxxxxx -----Original Message----- Andy Collins Subject: [access-uk] Re: VISTA and recording with GoldWave James, many thanks for this, I can now confirm to all that have been interested in this thread, that from following the directions from the link in the below message, I am now able to record streams on my Vista laptop, using Goldwave! - Andy ----- Original Message ----- From: "James O'Dell" <katherineandjames@xxxxxxxxxxxxxx> To: <access-uk@xxxxxxxxxxxxx> Sent: Monday, March 31, 2008 12:41 PM Subject: [access-uk] Re: VISTA and recording with GoldWaveHi Try these instructions, same as what I sent the other day but a bit clearer. http://iandixon.spaces.live.com/Blog/cns!36983156CAA83EA9!1725.entry James ----- Original Message ----- From: "Ray's Home" <rays-home@xxxxxxxxxxxxxxxxxx> To: <access-uk@xxxxxxxxxxxxx> Sent: Monday, March 31, 2008 12:16 PM Subject: [access-uk] Re: VISTA and recording with GoldWaveAndy, this is interesting indeed as the other Andy is pursuing this question on the Goldwave list. He's been told there that someone is recording streams using an external USB card and he reckons to be having no trouble. Maybe I should have a think about a well worded Google search on this subject, but I sure don't want to end up with a PC where I cannot carry on doing what I've taken for granted this past couple of years or so. Wouldn't it be interesting to know what broadcasters here think about the recording of internet streams? Seeing how people have been recording radio programmes for as long as anyone can remember, and they've even harvested long lost recordings because of this, where exactly lies the problem? It isn't as though you can get really decent music recordings this way; streams often leave a good deal to be desired, qualitywise. Cheers, From Ray I can be contacted off-list at: mailto:ray-48@xxxxxxxx -----Original Message----- Andy Collins Subject: [access-uk] Re: VISTA and recording with GoldWave Hi Carol - Having got Goldwave recording streems fine from my XP machine, I've just been trying to do the same on my Vista laptop, but when I look under the volume tab under prefereences in Goldwave, There is just a list of hardware devices, such as speakers, mic, headphones, there is no mono/stereo check box as there is on my XP machine, this may be about my sound card on my Vista machine more than about Vista itself, but either way, I can't record a streem on the laptop! Gold wave does play other recorded files under Vista though! - Andy ----- Original Message ----- From: "Carol Pearson" <carol.pearson29@xxxxxxxxxxxxxx> To: <access-uk@xxxxxxxxxxxxx> Sent: Monday, March 31, 2008 6:03 AM Subject: [access-uk] Re: VISTA and recording with GoldWaveYou could contact the guy who writes the software for GoldWaveandsee whathe says about Vista. There's a contact on www.goldwave.com -- Carol carol.pearson29@xxxxxxxxxxxxxx On Sunday, March 30, 2008 5:28 PM (UK time), Andy Logue at andy@xxxxxxxxxxxxxxxxxxxxxxxxx said:Hi Ray. I followed the instructions, but unfortunately , it did not assist me much. Caroline told me to go into Sound/Recording and look for other devices. I did this but only got one more Line-In function, associated to the computer's internal card. I've got my Soundblaster set as the default and I can listen to the BBC Player and listen to music files using GoldWave, but as yet, I cannot find a way of getting GW to record audio streams. This is so frustrating and disappointing Ray. If I cannot resolve this issue, I'll need to consider removing VISTA and installing XP Media Center. Best wishes. Andy. ----- Original Message ----- From: "Ray's Home" <rays-home@xxxxxxxxxxxxxxxxxx> To: <access-uk@xxxxxxxxxxxxx> Sent: Sunday, March 30, 2008 1:07 PM Subject: [access-uk] Re: VISTA and recording with GoldWaveSo, Andy, and anyone using Vista wanting to record streaming audio, will you give James's suggested changes to sound settings a try and tell us if you can then record streams using Goldwave or another audio editor? From Ray I can be contacted off-list at: mailto:ray-48@xxxxxxxx -----Original Message----- James O'Dell Subject: [access-uk] Re: VISTA and recording with GoldWave Andy Try this info. I'm not a Vista user myself, but understand that you can record 'what you hear'. *** start of copied text *** go to, control panel (classic view) - sound - recording tab - right click in the white area - select 'show disabled devices' - right click on stereo mix - select 'enable' now you can use any progam you like e.g. audacity to record what you hear. *** End of copied text *** Hope this is useful, sorry I can't provide any specific instructions on how to achieve this with a screenreader. James ----- Original Message ----- From: "Andy Logue" <andy@xxxxxxxxxxxxxxxxxxxxxxxxx> Subject: [access-uk] Re: VISTA and recording with GoldWaveHi Douglas. Same here mate. I have a lovely new crispy VISTA computeryetI'musingmy really old Packard Bell to record radio shows tonight. I really do hope that VISTA is not going to prevent me from using GoldWave and recording "What you Hear". I'm waiting on some advise from the experts in this regard, but my gut feeling is that copywrite is so important, they will only now allow you to listen and not record just about anything coming through your computer.. I really do hope I'm proven wrong here as recording audio isaverybigpart of my interest in computing. without this function,thenthereislittle in computing for me I'm thinking. If you manage to get around this problem, please let me know about it eh? Very best wishes. Andy. ----- Original Message ----- From: "Douglas Harrison" <harrison1d@xxxxxxxxxxxxxx> To: <access-uk@xxxxxxxxxxxxx> Sent: Saturday, March 29, 2008 7:41 AM Subject: [access-uk] Re: VISTA and recording with GoldWaveAndy, I have only been using vista for a relatively short time, but I have had problems recording (even via the microphone) with Goldwave. I have had error messages such as "Access violation" etc. from time to time, and have reverted to doing all recording on an XP system until I have time to sort out whether there is really a problem with Goldwave and Vista. Douglas On 28 Mar 2008 at 23:51, Andy Logue wrote:Hi all. I'm experiencing some difficulty getting VISTA and my Soundblaster 24 bit external sound card to record "What you hear". IregularlyrecordfromBBC Radio Scotland and would hate to think that VISTA is intent to prevent me from being able to do this. Would love to hear from anyone using VISTA with GoldWave. Best wishes. Andy** To leave the list, click on the immediately-following link:- ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe] ** If this link doesn't work then send a message to: ** access-uk-request@xxxxxxxxxxxxx ** and in the Subject line type ** unsubscribe ** For other list commands such as vacation mode, click on the ** immediately-following link:- ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq] ** or send a message, to ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq -- This email has been verified as Virus free. Virus Protection and more available at http://www.plus.net** To leave the list, click on the immediately-following link:- ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe] ** If this link doesn't work then send a message to: ** access-uk-request@xxxxxxxxxxxxx ** and in the Subject line type ** unsubscribe ** For other list commands such as vacation mode, click on the ** immediately-following link:- ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq] ** or send a message, to ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq** To leave the list, click on the immediately-following link:- ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe] ** If this link doesn't work then send a message to: ** access-uk-request@xxxxxxxxxxxxx ** and in the Subject line type ** unsubscribe ** For other list commands such as vacation mode, click on the ** immediately-following link:- ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq] ** or send a message, to ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq -- This email has been verified as Virus free. Virus Protection and more available at http://www.plus.net** To leave the list, click on the immediately-following link:- ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe] ** If this link doesn't work then send a message to: ** access-uk-request@xxxxxxxxxxxxx ** and in the Subject line type ** unsubscribe ** For other list commands such as vacation mode, click on the ** immediately-following link:- ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq] ** or send a message, to** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
** To leave the list, click on the immediately-following link:- ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe] ** If this link doesn't work then send a message to: ** access-uk-request@xxxxxxxxxxxxx ** and in the Subject line type ** unsubscribe ** For other list commands such as vacation mode, click on the ** immediately-following link:- ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq] ** or send a message, to ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq