[access-uk] Re: setting up a microphone with a PC running Windows XP and Jaws 87.1
- From: "Carol Pearson" <carol.pearson@xxxxxxxxxxxx>
- To: <access-uk@xxxxxxxxxxxxx>
- Date: Mon, 13 Nov 2006 02:18:58 -0000
Alex,
You would be advised to test it with Skype though, to ensure that the
recordings are OK in Skype. (It has been known for other programs to record
well and not Skype for some reason . . ..)
Tell us what you think of the recording and we may have further advice, but
it sounds as though you're well on the way now.
--
Carol
carol.pearson@xxxxxxxxxxxx
----- Original Message -----
From: "Alexander Shannon" <alexacts2v4@xxxxxxxxxxxxxx>
To: <access-uk@xxxxxxxxxxxxx>
Sent: Saturday, November 11, 2006 4:11 PM
Subject: [access-uk] Re: setting up a microphone with a PC running Windows
XP and Jaws 87.1
Hi Douglas and all,
Douglas, Thank you for the suggestion. I have tried it and with sound
recorder the microphone does work. although I am not sure if it will work
with goldwave which I have.
I have downloaded and installed skipe version 2.5 as when I was talking to
Peter Beasley on the telephone regarding issues to do with this thread, I
could not get the software for the speak easy room at
www.ourplace.acbradio.orgto install correctly on my laptop, therefore I
have now installed skipe 2.5 as I was going to use it to test my
microphone, but I have not tested it with the microphone due to the
suggestion Douglas gave in the e-mail to which I am replying.
.
Alexander Shannon
** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
Other related posts: