Yes. But what I'm saying is I want it to stop auto filling in the city field.Unless you really don't get out much it's far more likely that you're destination is in another town.
At 10:27 AM 8/25/2013, you wrote:
Well you can't leave the city field with a city in it you need to have both city and zip blank and then choose which you want and enter the info...i.e., if I put in a address and then leave the city as the one it thinks I am in and then put another zip code to some city on the other side of the country how do you expect it to give you a resule for that address when you told it a different city and zip. > -----Original Message----- > From: gps-talkusers-bounce@xxxxxxxxxxxxx [mailto:gps-talkusers- > bounce@xxxxxxxxxxxxx] On Behalf Of Kevin Barry > Sent: Sunday, August 25, 2013 07:16 > To: gps-talkusers@xxxxxxxxxxxxx; gps-talkusers@xxxxxxxxxxxxx > Subject: [gps-talkusers] Re: few comments on SE on my iPhone > > When I entered in a street address and a zip code I was given an > error and forced to go back in and change the default city. > > At 10:00 AM 8/25/2013, Chris Grabowski wrote: > >because it doesn't matter, just enter the zipcode and leave the city > >alone. > > > >My current city is buffalo NY and I can enter 95616 in the zip and > >in the address field search for the address I am looking for in Davis > CA > >and it works. For example: > >1. create a route by address. > >2. move to the zipcode field and enter 95616. > >3. Move to the address field and type 429 F st. > > > >Without changing the city or state it will find 429 F st Davis CA > 95616. > > > > > >If I don't enter in a zipcode just enter 123 main street, it will find > >that in buffalo NY as that is my current city. > > > >You don't need to clear the city or state fields if you don't want to. > >The current city and state is automatically populated for convenience. > > > > > > > >On Sun, 25 Aug 2013 09:42:35 -0400 > >Kevin Barry <krbarry@xxxxxxxxx> wrote: > > > > > If it will allow me to enter the zip code with a blank city field > > then how about not defaulting to filling the city field with my > > current address? > > > > > > At 09:36 AM 8/25/2013, you wrote: > > > >you don't need the zip code. leave the zipcode blank and use the > city, > > > >or use the zipcode if you want and ignore the city. > > > > > > > > > > > > > > > >On Sun, 25 Aug 2013 09:15:22 -0400 > > > >Kevin Barry <krbarry@xxxxxxxxx> wrote: > > > > > > > > > While using the latest version of SEG on my iPhone I conjured > > up > a few thoughts. > > > > > 1. I really would like a display of current speed and > > > direction while following a driving route. This already appears > > > when using the app but with no route to follow. > > > > > 2. While proceeding en route on a road that had traffic > > lights > the ETA seemed extremely variable. That is, when stopped > > at a red > light my ETA was listed at several rather insane values. > > 48 hours > to go three miles for example. Evidently, the app is > > extrapalating > a little too much with current speeds. > > > > > 3. When entering a destination I don't see why I must > > enter > both the zip code and city. A zip code tells the map > > exactly where > I wish to go and I don't see why a city is also > necessary. > > > > > I guess that's about it. Thanks for your cooperation. > > > > > Kevin > > > > > > > > > > > > > > > At 07:56 AM 8/25/2013, John Gassman wrote: > > > > > >Its been a couple of years since I used GPS on my apex. > > > > > >I'm lookig forward to using it with the PC Maps and > > comparing > all >with the seeing Eye app on my iPhone. > > > > > >I charged the battery on my receiver for about four hours. > > > > > >I have Gps 2013 installed. I have Keysoft 9.3. > > > > > >I have my bluetooth paired and active and it sees the iBlue > receiver. > > > > > >But when I go into attempting to find satelites, it says 0 > found. > > > > > >I just tried a JKL reset and still no good. > > > > > >X-archive-position: 22375 > > > > > >X-ecartis-version: Ecartis v1.0.0 > > > > > >Sender: gps-talkusers-bounce@xxxxxxxxxxxxx > > > > > >Errors-to: gps-talkusers-bounce@xxxxxxxxxxxxx > > > > > >X-original-sender: johngassman@xxxxxxxxxxxxxx > > > > > >Precedence: normal > > > > > >Reply-To: gps-talkusers@xxxxxxxxxxxxx > > > > > >List-help: <mailto:ecartis@xxxxxxxxxxxxx?Subject=help> > > > > > >List-unsubscribe: > > > <gps-talkusers-request@xxxxxxxxxxxxx?Subject=unsubscribe> > > > > > >List-software: Ecartis version 1.0.0 > > > > > >List-Id: gps-talkusers <gps-talkusers.freelists.org> > > > > > >X-List-ID: gps-talkusers <gps-talkusers.freelists.org> > > > > > >List-subscribe: > > <gps-talkusers-request@xxxxxxxxxxxxx?Subject=subscribe> > > > > > >List-owner: <mailto:kim@xxxxxxxxxxxxxxxx> > > > > > >List-post: <mailto:gps-talkusers@xxxxxxxxxxxxx> > > > > > >List-archive: <http://www.freelists.org/archives/gps-> talkusers> > > > > > >X-list: gps-talkusers > > > > > > > > > > > >Any thoughts? You can email me off list. I know this > > subject > has >been covered before. > > > > > >John > > > > > > > > > > > >To change your email settings (unsubscribe, digest only, > > or > vacation mode): > > > > > >http://senderogroup.com/social_media/email.htm > > > > > > > > > > > >Additionally, to unsubscribe send an email > > > to >gps-talkusers-request@xxxxxxxxxxxxx with "unsubscribe" in the > Subject. > > > > > > > > > > > > > > > To change your email settings (unsubscribe, digest only, or > > vacation mode): > > > > > http://senderogroup.com/social_media/email.htm > > > > > > > > > > Additionally, to unsubscribe send an email to > > > gps-talkusers-request@xxxxxxxxxxxxx with "unsubscribe" in the > Subject. > > > > > > > > > > > >-- > > > > > > > >Web sites: > > > >http://www.mysticaccess.com > > > >http://www.mysticaccesspodcast.com > > > >Twitter: mysticaccess > > > > > > > > > > > > > > > >To change your email settings (unsubscribe, digest only, or > > vacation mode): > > > >http://senderogroup.com/social_media/email.htm > > > > > > > >Additionally, to unsubscribe send an email > > to >gps-talkusers-request@xxxxxxxxxxxxx with "unsubscribe" in the > Subject. > > > > > > > > > To change your email settings (unsubscribe, digest only, or > vacation mode): > > > http://senderogroup.com/social_media/email.htm > > > > > > Additionally, to unsubscribe send an email to > > gps-talkusers-request@xxxxxxxxxxxxx with "unsubscribe" in the > Subject. > > > > > >-- > > > >Web sites: > >http://www.mysticaccess.com > >http://www.mysticaccesspodcast.com > >Twitter: mysticaccess > > > > > > > >To change your email settings (unsubscribe, digest only, or vacation > mode): > >http://senderogroup.com/social_media/email.htm > > > >Additionally, to unsubscribe send an email to > >gps-talkusers-request@xxxxxxxxxxxxx with "unsubscribe" in the Subject. > > > To change your email settings (unsubscribe, digest only, or vacation > mode): > http://senderogroup.com/social_media/email.htm > > Additionally, to unsubscribe send an email to gps-talkusers- > request@xxxxxxxxxxxxx with "unsubscribe" in the Subject. To change your email settings (unsubscribe, digest only, or vacation mode): http://senderogroup.com/social_media/email.htmAdditionally, to unsubscribe send an email to gps-talkusers-request@xxxxxxxxxxxxx with "unsubscribe" in the Subject.
To change your email settings (unsubscribe, digest only, or vacation mode): http://senderogroup.com/social_media/email.htm Additionally, to unsubscribe send an email to gps-talkusers-request@xxxxxxxxxxxxx with "unsubscribe" in the Subject.