[gps-talkusers] Re: few comments on SE on my iPhone

  • From: Kevin Barry <krbarry@xxxxxxxxx>
  • To: gps-talkusers@xxxxxxxxxxxxx
  • Date: Sun, 25 Aug 2013 10:45:37 -0400

Indeed yes. I just did it again now and this time it worked properly i.e ignoring the contents of the "city" field. But yesterday I did this and it gave me an error until I cleared the city field. Unless I did something else different then but I do not recall what it might be.

Kevin

At 10:35 AM 8/25/2013, you wrote:
Did you enter the zipcode in the zipcode field and the address number
and street in the address field like in my example steps below?
?




On Sun, 25 Aug 2013 10:15:41 -0400
Kevin Barry <krbarry@xxxxxxxxx> wrote:

> When I entered in a street address and a zip code I was given an error and forced to go back in and change the default city.
>
> At 10:00 AM 8/25/2013, Chris Grabowski wrote:
> >because it doesn't matter, just enter the zipcode and leave the city
> >alone.
> >
> >My current city is buffalo NY and I can enter 95616 in the zip and
> >in the address field search for the address I am looking for in Davis CA
> >and it works.  For example:
> >1.  create a route by address.
> >2.  move to the zipcode field and enter 95616.
> >3.  Move to the address field and type 429 F st.
> >
> >Without changing the city or state it will find 429 F st Davis CA 95616.
> >
> >
> >If I don't enter in a zipcode just enter 123 main street, it will find
> >that in buffalo NY as that is my current city.
> >
> >You don't need to clear the city or state fields if you don't want to.
> >The current city and state is automatically populated for convenience.
> >
> >
> >
> >On Sun, 25 Aug 2013 09:42:35 -0400
> >Kevin Barry <krbarry@xxxxxxxxx> wrote:
> >
> > > If it will allow me to enter the zip code with a blank city field > then how about not defaulting to filling the city field with my > current address?
> > >
> > > At 09:36 AM 8/25/2013, you wrote:
> > > >you don't need the zip code. leave the zipcode blank and use the city,
> > > >or use the zipcode if you want and ignore the city.
> > > >
> > > >
> > > >
> > > >On Sun, 25 Aug 2013 09:15:22 -0400
> > > >Kevin Barry <krbarry@xxxxxxxxx> wrote:
> > > >
> > > > > While using the latest version of SEG on my iPhone I conjured > up > a few thoughts. > > > > > 1. I really would like a display of current speed and > > direction while following a driving route. This already appears > > when using the app but with no route to follow. > > > > > 2. While proceeding en route on a road that had traffic > lights > the ETA seemed extremely variable. That is, when stopped > at a red > light my ETA was listed at several rather insane values. > 48 hours > to go three miles for example. Evidently, the app is > extrapalating > a little too much with current speeds. > > > > > 3. When entering a destination I don't see why I must > enter > both the zip code and city. A zip code tells the map > exactly where > I wish to go and I don't see why a city is also necessary.
> > > > >    I guess that's about it. Thanks for your cooperation.
> > > > > Kevin
> > > > >
> > > > >
> > > > > At 07:56 AM 8/25/2013, John Gassman wrote:
> > > > > >Its been a couple of years since I used GPS on my apex.
> > > > > >I'm lookig forward to using it with the PC Maps and > comparing > all >with the seeing Eye app on my iPhone.
> > > > > >I charged the battery on my receiver for about four hours.
> > > > > >I have Gps 2013 installed. I have Keysoft 9.3.
> > > > > >I have my bluetooth paired and active and it sees the iBlue receiver.
> > > > > >But when I go into attempting to find satelites, it says 0 found.
> > > > > >I just tried a JKL reset and still no good.
> > > > > >X-archive-position: 22375
> > > > > >X-ecartis-version: Ecartis v1.0.0
> > > > > >Sender: gps-talkusers-bounce@xxxxxxxxxxxxx
> > > > > >Errors-to: gps-talkusers-bounce@xxxxxxxxxxxxx
> > > > > >X-original-sender: johngassman@xxxxxxxxxxxxxx
> > > > > >Precedence: normal
> > > > > >Reply-To: gps-talkusers@xxxxxxxxxxxxx
> > > > > >List-help: <mailto:ecartis@xxxxxxxxxxxxx?Subject=help>
> > > > > >List-unsubscribe: > > <gps-talkusers-request@xxxxxxxxxxxxx?Subject=unsubscribe>
> > > > > >List-software: Ecartis version 1.0.0
> > > > > >List-Id: gps-talkusers <gps-talkusers.freelists.org>
> > > > > >X-List-ID: gps-talkusers <gps-talkusers.freelists.org>
> > > > > >List-subscribe: > <gps-talkusers-request@xxxxxxxxxxxxx?Subject=subscribe>
> > > > > >List-owner: <mailto:kim@xxxxxxxxxxxxxxxx>
> > > > > >List-post: <mailto:gps-talkusers@xxxxxxxxxxxxx>
> > > > > >List-archive: <http://www.freelists.org/archives/gps-talkusers>
> > > > > >X-list: gps-talkusers
> > > > > >
> > > > > >Any thoughts? You can email me off list. I know this > subject > has >been covered before.
> > > > > >John
> > > > > >
> > > > > >To change your email settings (unsubscribe, digest only, > or > vacation mode):
> > > > > >http://senderogroup.com/social_media/email.htm
> > > > > >
> > > > > >Additionally, to unsubscribe send an email > > to >gps-talkusers-request@xxxxxxxxxxxxx with "unsubscribe" in the Subject.
> > > > >
> > > > >
> > > > > To change your email settings (unsubscribe, digest only, or > vacation mode):
> > > > > http://senderogroup.com/social_media/email.htm
> > > > >
> > > > > Additionally, to unsubscribe send an email to > > gps-talkusers-request@xxxxxxxxxxxxx with "unsubscribe" in the Subject.
> > > >
> > > >
> > > >--
> > > >
> > > >Web sites:
> > > >http://www.mysticaccess.com
> > > >http://www.mysticaccesspodcast.com
> > > >Twitter: mysticaccess
> > > >
> > > >
> > > >
> > > >To change your email settings (unsubscribe, digest only, or > vacation mode):
> > > >http://senderogroup.com/social_media/email.htm
> > > >
> > > >Additionally, to unsubscribe send an email > to >gps-talkusers-request@xxxxxxxxxxxxx with "unsubscribe" in the Subject.
> > >
> > >
> > > To change your email settings (unsubscribe, digest only, or vacation mode):
> > > http://senderogroup.com/social_media/email.htm
> > >
> > > Additionally, to unsubscribe send an email to > gps-talkusers-request@xxxxxxxxxxxxx with "unsubscribe" in the Subject.
> >
> >
> >--
> >
> >Web sites:
> >http://www.mysticaccess.com
> >http://www.mysticaccesspodcast.com
> >Twitter: mysticaccess
> >
> >
> >
> >To change your email settings (unsubscribe, digest only, or vacation mode):
> >http://senderogroup.com/social_media/email.htm
> >
> >Additionally, to unsubscribe send an email to >gps-talkusers-request@xxxxxxxxxxxxx with "unsubscribe" in the Subject.
>
>
> To change your email settings (unsubscribe, digest only, or vacation mode):
> http://senderogroup.com/social_media/email.htm
>
> Additionally, to unsubscribe send an email to gps-talkusers-request@xxxxxxxxxxxxx with "unsubscribe" in the Subject.


--

Web sites:
http://www.mysticaccess.com
http://www.mysticaccesspodcast.com
Twitter: mysticaccess



To change your email settings (unsubscribe, digest only, or vacation mode):
http://senderogroup.com/social_media/email.htm

Additionally, to unsubscribe send an email to gps-talkusers-request@xxxxxxxxxxxxx with "unsubscribe" in the Subject.


To change your email settings (unsubscribe, digest only, or vacation mode):
http://senderogroup.com/social_media/email.htm

Additionally, to unsubscribe send an email to gps-talkusers-request@xxxxxxxxxxxxx with 
"unsubscribe" in the Subject.

Other related posts: