Il 08 luglio 2010 08.29, Giuliano Natali <diaolin@xxxxxxxxxxx> ha scritto: > lentissime, controlla i dischi > ho provato a lanciare "smartctl -d scsi -t short /dev/sda" e "smartctl -d scsi -t short /dev/sdb" e smartctl NON ha trovato errori. > e metti a posto eventuali configurazioni DMA. > i dischi sono SCSI ho lanciato un "sdparm -l /dev/sda" ed ottengo questo: /dev/sda: IBM-ESXS MAW3073NC FN C206 Direct access device specific parameters: WP=0 DPOFUA=0 Read write error recovery [rw] mode page: AWRE 1 [cha: y, def: 1, sav: 1] Automatic write reallocation enabled ARRE 1 [cha: y, def: 1, sav: 1] Automatic read reallocation enabled PER 0 [cha: y, def: 0, sav: 0] Post error Caching (SBC) [ca] mode page: WCE 0 [cha: y, def: 0, sav: 0] Write cache enable RCD 0 [cha: y, def: 0, sav: 0] Read cache disable Control [co] mode page: SWP 0 [cha: n, def: 0, sav: 0] Software write protect Informational exceptions control [ie] mode page: EWASC 1 [cha: y, def: 0, sav: 1] Enable warning DEXCPT 0 [cha: y, def: 0, sav: 0] Disable exceptions MRIE 6 [cha: y, def: 4, sav: 6] Method of reporting informational exceptions le righe che mi sembrano sospette sono: Direct access device specific parameters: WP=0 DPOFUA=0 e RCD 0 [cha: y, def: 0, sav: 0] Read cache disable domande: - è possibile abilitare DMA su dischi SCSI ? - se sì... nel mio caso è attiva ? > togli il cd dallo stesso canale dei dischi > il CD è un IDE e va per la sua strada grazie. -- Per iscriversi (o disiscriversi), basta spedire un messaggio con OGGETTO "subscribe" (o "unsubscribe") a mailto:linuxtrent-request@xxxxxxxxxxxxx