yay! Gotta love problems gettin solved! sharp fella that Mr Trouble bloke eh. ----- Original Message ----- From: "John P. Thomas" <johnt@xxxxxxxxxxxx> To: <jawsscripts@xxxxxxxxxxxxx> Sent: Sunday, November 03, 2013 2:05 AM Subject: [jawsscripts] Re: Alternative methods for clicking a button > Congratulations! You are the winner! The problem was a security setting in > the Internet Options section of IE10. I never messed around in this area, > because I never thought that it would cause such a problem. When I > unchecked > "Enable Protected Mode" I was then able to activate the uncooperative > 'save' > button. I then took a look at the "Custom Level" submenu of the Security > tab > and found dozens of settings for selecting or deselecting specific > security > settings. I suppose that my next task will be to try and determine the > specific setting that was causing the problem. I am not sure that turning > off the entire security system is a good idea. There are a bunch of > settings > related to active x, which sound like a promising place to start my > experimentation. > > I really appreciate everyone's help in trying to figure out this problem > that has been causing a lot of frustration in my life for the past 6 > months. > I will pass on the results of my effort to isolate the exact security > setting that is causing the problem. > > Thanks so much! > John > > -----Original Message----- > From: jawsscripts-bounce@xxxxxxxxxxxxx > [mailto:jawsscripts-bounce@xxxxxxxxxxxxx] On Behalf Of Trouble > Sent: Friday, November 01, 2013 11:29 AM > To: jawsscripts@xxxxxxxxxxxxx > Subject: [jawsscripts] Re: Alternative methods for clicking a button > > That would mean that firefox has something unblocked therefor able to use > the button. IE has lots of security that firefox doesn't. So I would be > looking in the security tab menu in IE and find what is turned off or > blocked. I do know that a lot of java, java script and active x are > disabled. > > At 10:33 AM 11/1/2013, you wrote: >>Hi Geoff, >> >>No that's not quite right. >> >>I can easily activate the button in Firefox, but my problem is that >>Firefox routinely crashes 4 or more times per day and when it goes it >>often locks up my laptop, which requires a forced shutdown since JAWS > speech is also lost. >> >>I use IE10 for most of my interaction with my company's webpages with >>the exception of the one component of their system where I need to use > Firefox. >>I have exhausted all of the Firefox suggestions to prevent crashes, but >>it still keeps on crashing. >> >>On my particular computer, with JAWS turned off, my wife was not able >>to activate the problematic 'save' button when using IE10 with the mouse > pad. >>Supposedly the set of webpages I am using was optimized for IE, and >>other people in the company are able to activate the 'save' button for >>the page with IE. >> >>I have tried activating the button with the Spacebar, LeftMouse, >>LeftMouseLock/Unlock, and EnterKey. I have tested this with the >>VirtualCursor, JAWSCursor, InvisibleCursor, and now with Auto Forms >>Mode turned on and off, and with the VirtualCursor turned off. I have >>tried tethering the JAWSCursor to the PCCursor and using various >>sequences for routing cursors. >> >>I am beginning to suspect that it is somehow a problem with my specific >>laptop, but I don't have any ideas about how to solve the problem at >>that level. >> >>I find that Firefox tends to not crash when it is freshly activated. It >>usually does so after a couple hours of use. I have been starting to >>periodically close all the Firefox windows and reload the program with >>the hope of preventing a crash. Most of the time when Firefox crashes, >>I am simply typing in an edit field. >> >>John >> >> >>-----Original Message----- >>From: jawsscripts-bounce@xxxxxxxxxxxxx >>[mailto:jawsscripts-bounce@xxxxxxxxxxxxx] On Behalf Of Geoff Chapman >>Sent: Friday, November 01, 2013 9:49 AM >>To: jawsscripts@xxxxxxxxxxxxx >>Subject: [jawsscripts] Re: Alternative methods for clicking a button >> >>Ok, Thanks John for the response. >> >>But, let me get this totally straight. >>Are you saying, that your major problem here, is not being able to >>click/activate, a single but imperitive save button on a given app in a >>Web environment? >>No matter what you do, or what browser you try? Is this correct? >> >>But, that when jaws is not loaded, that you can successfully tab to it >>and activate it with SpaceBar then? >> >>But that when jaws is loaded, and you turn virtual cursor off, that the >>same actions of tabbing and hitting SpaceBar, no longer will activate the > button? >>Is that right? >> >>That seems incredible if so! >> >>And Additionally, just refresh us, if you get the physical mouse on the >>button, and you click the physical mouse button, whilst jaws is loaded, >>does the button activate? >>I remember you saying that no keyboard mouse emulation clicks, either >>NumPad Slash, nor a doubleClick of JawsKey+NumPadSlash, would activate >>it whilst the mouse pointer is *definitely* (visually confirmed,) over >>the button. is that right too? >> >> >>----- Original Message ----- >>From: "John P. Thomas" <johnt@xxxxxxxxxxxx> >>To: <jawsscripts@xxxxxxxxxxxxx> >>Sent: Saturday, November 02, 2013 12:02 AM >>Subject: [jawsscripts] Re: Alternative methods for clicking a button >> >> >> > Hi Geoff, >> > >> > I had long forgotten INSERT+Z. I keep 'Auto Forms Mode' turned off >> > because it interferes with my scripts, which often crawl over >> > several edit fields to get to where I need to go. I did the >> > experiments that you suggested with turning off the virtual cursor >> > and tabbing to the 'save' button, but nothing changed. I also played >> > with using the JAWSCursor and InvisibleCursor with the VertualCursor >> > off, but it didn't help the situation. It was a good idea. >> > >> > Thanks, >> > John >> > >> > >> > -----Original Message----- >> > From: jawsscripts-bounce@xxxxxxxxxxxxx >> > [mailto:jawsscripts-bounce@xxxxxxxxxxxxx] On Behalf Of Geoff Chapman >> > Sent: Friday, November 01, 2013 2:20 AM >> > To: jawsscripts@xxxxxxxxxxxxx >> > Subject: [jawsscripts] Re: Alternative methods for clicking a button >> > >> > John, just a total far out long shot thought, but have you tried >> > experimenting with this horrid page, when turning virtual cursor off >> > totally? >> > with Jaws+Zed? >> > >> > particularly where you've got issues of jaws seeming like it's not >> > recognizing an edit field, either manually or automatically (I >> > presume you've also tried setting forms mode to manual as well >> > rather than relying on it's auto-detection algorithm that's been on >> > by default now for some versions, though I always turn it off and go >> > back to the old manual setting >> > myself.) >> > and seeing, for example, whether jaws then happily reads the text in >> > the edit field with arrows when virtual cursor is off permanently I >> > don't know how iTunes is done, but it's got this wierd mix of >> > virtual pc being active, and then places where without telling you >> > it's found a forms mode field with that auto detection stuff sound >> > thing, so it doesn't know etc, when you flip virtual PC cursor off >> > with jaws+Zed, then tab to them you can fill them in. >> > else, it just thinks virtual cursor is still active, and doesn't >> > even except text input, because it's not recognizing there's a forms >> > mode field there to, allow, it to switch into? >> > anyways just wondered if you'd messed with that idea yet. >> > >> > >> > >> > ----- Original Message ----- >> > From: "John P. Thomas" <johnt@xxxxxxxxxxxx> >> > To: <jawsscripts@xxxxxxxxxxxxx> >> > Sent: Wednesday, October 30, 2013 11:48 PM >> > Subject: [jawsscripts] Re: Alternative methods for clicking a button >> > >> > >> >>I also installed JAWS 15 to see if it could activate the 'save' >> >>button that has been so problematic. This didn't help. >> >> John >> >> >> >> >> >> >> >> -----Original Message----- >> >> From: jawsscripts-bounce@xxxxxxxxxxxxx >> >> [mailto:jawsscripts-bounce@xxxxxxxxxxxxx] On Behalf Of John P. >> >> Thomas >> >> Sent: Wednesday, October 30, 2013 8:34 AM >> >> To: jawsscripts@xxxxxxxxxxxxx >> >> Subject: [jawsscripts] Re: Alternative methods for clicking a >> >> button >> >> >> >> Someone also mentioned giving Google Chrome a try. There is good >> >> news and bad. The good news is, I was able to click the 'save' button > with chrome. >> >> The bad news is that JAWS can't see any of the text in the edit >> >> fields of the specific webpages that I need to use when forms mode >> >> is activated, and the cursor keys are unable to move the cursor >> >> within the fields. So, this doesn't look promising. >> >> John >> >> >> >> >> >> -----Original Message----- >> >> From: jawsscripts-bounce@xxxxxxxxxxxxx >> >> [mailto:jawsscripts-bounce@xxxxxxxxxxxxx] On Behalf Of John P. >> >> Thomas >> >> Sent: Wednesday, October 30, 2013 8:21 AM >> >> To: jawsscripts@xxxxxxxxxxxxx >> >> Subject: [jawsscripts] Re: Alternative methods for clicking a >> >> button >> >> >> >> Hi >> >> >> >> I removed JAVA 6 and installed the latest JAVA version 7.X and >> >> activated the accessible bridge. Unfortunately this didn't change >> >> the situation. Any other thoughts? >> >> >> >> John >> >> >> >> >> >> -----Original Message----- >> >> From: jawsscripts-bounce@xxxxxxxxxxxxx >> >> [mailto:jawsscripts-bounce@xxxxxxxxxxxxx] On Behalf Of Trouble >> >> Sent: Monday, October 28, 2013 9:40 PM >> >> To: jawsscripts@xxxxxxxxxxxxx >> >> Subject: [jawsscripts] Re: Alternative methods for clicking a >> >> button >> >> >> >> If you have the latest version of java. You will find a check box >> >> for it in the start menu, programs, accessories, ease of access >> >> center. >> >> Just tab to use computer without a display. >> >> >> >> At 03:58 PM 10/28/2013, you wrote: >> >>>Hi >> >>> >> >>>accessible bridge? I didn't find that in the list of add-ons. >> >>>Should it show up there or somewhere else? I did a quick Google >> >>>search, but didn't find any helpful information. Is this something >> >>>that needs to be >> >> installed? >> >>> >> >>>Thanks >> >>>John >> >>> >> >>> >> >>>-----Original Message----- >> >>>From: jawsscripts-bounce@xxxxxxxxxxxxx >> >>>[mailto:jawsscripts-bounce@xxxxxxxxxxxxx] On Behalf Of Trouble >> >>>Sent: Monday, October 28, 2013 11:10 AM >> >>>To: jawsscripts@xxxxxxxxxxxxx >> >>>Subject: [jawsscripts] Re: Alternative methods for clicking a >> >>>button >> >>> >> >>>I know you stated you turned java back on but did you enable the >> >>>accessible bridge also? Without that enabled it still could be a >> >>>jaws problem not actually seeing a physical button but reporting >> >>>that there is one. Like having a piece of glass between you and it >> >>>. You can see it but not touch it. You also stated something about > downloads. >> >>>For any info there do a control + j. It runs them in background >> >>>sense version 9. >> >>> >> >>>At 10:08 AM 10/28/2013, you wrote: >> >>> >I am using IE10. I haven't tried Google chrome, because other >> >>> >people in the company have reported that it has problems with >> >>> >this web application. But maybe I should try it myself. >> >>> > >> >>> >John >> >>> > >> >>> > >> >>> >-----Original Message----- >> >>> >From: jawsscripts-bounce@xxxxxxxxxxxxx >> >>> >[mailto:jawsscripts-bounce@xxxxxxxxxxxxx] On Behalf Of John >> >>> >Martyn >> >>> >Sent: Monday, October 28, 2013 12:22 AM >> >>> >To: jawsscripts@xxxxxxxxxxxxx >> >>> >Subject: [jawsscripts] Re: Alternative methods for clicking a >> >>> >button >> >>> > >> >>> >What version of IE are you using? IE can behave weird in a lot of >> >>> >instances that Firefox doesn't. Have you tried google chrome? >> >>> >John >> >>> > >> >>> >-----Original Message----- >> >>> >From: jawsscripts-bounce@xxxxxxxxxxxxx >> >>> >[mailto:jawsscripts-bounce@xxxxxxxxxxxxx] On Behalf Of John P. >> >>> >Thomas >> >>> >Sent: Sunday, October 27, 2013 2:56 PM >> >>> >To: jawsscripts@xxxxxxxxxxxxx >> >>> >Subject: [jawsscripts] Re: Alternative methods for clicking a >> >>> >button >> >>> > >> >>> >Hi >> >>> > >> >>> >I appreciate the suggestions. I need to clarify my previous post >> >>> >and add some new information. >> >>> > >> >>> >First, the ‘save’ button is fully visible to JAWS 14. I can >> >>> >move the JAWSCursor, InvisibleCursor and the VertualCursor to the > button. >> >>> >I can check the coordinates of the JAWSCursor and the >> >>> >InvisibleCursor for the ‘save’ button, and they are the same. >> >>> >I have my wife manually move the mouse to the ‘save’ button >> >>> >and JAWS reported the exact same cursor location. >> >>> > >> >>> >I have tried activating the button with the Enter Key, LeftMouse >> >>> >button on the numpad, the Left MouseLock button, and the >> >>> >Spacebar, but none of these will activate the button. I also had >> >>> >my wife try to activate the button with JAWS loaded and without >> >>> >JAWS loaded, but it will not respond on my laptop. Everyone else >> >>> >in my company is using IE and is able to click the ‘save’ >> >>> >button, so it is beginning to sound like it is something about my >> >>> >computer that is causing the problem. >> >>> > >> >>> >I did reactivate JAVA, which I had turned off when I disabled all >> >>> >my tool bars and add-ins to see if they were causing this >> >>> >problem, but JAVA restoration didn’t help. >> >>> > >> >>> >As I mentioned in my previous post, I am able to activate the >> >>> >‘save’ button in Firefox. The problem is that Firefox >> >>> >routinely crashes multiple times during the day, and I need to >> >>> >use IE. I am using >> >>> >IE10 in Windows 7. I am able to activate buttons on other >> >>> >webpages in >> >>> >IE10 normally. >> >>> > >> >>> >Here is some additional information that might be of use. >> >>> > >> >>> >Flexible Web is Enabled (I don’t know what this means) If >> >>> >IsFlexibleWebEnabled () Then SayString ("flex enabled") Else >> >>> >sayString ("not flex enabled") EndIf >> >>> > >> >>> >MSAA is being used. (I don’t know anything about MSAA) If >> >>> >IsMSAAWindow (GetFocus()) then SayString ("MSAA in use ") else >> >>> >saystring ("not MSAA") EndIf >> >>> > >> >>> >The window where the ‘save’ button is located is not obscured. >> >>> >If IsWindowObscured (GetFocus()) then SayString ("window is >> >>> >obscured") else SayString ("window not obscured") EndIf >> >>> > >> >>> >When the JAWSCursor or InvisibleCursor are used, and they point >> >>> >to the ‘save’ button, the button shows that it is contained >> >>> >within the active window. When the VertualCursor is used, then >> >>> >the same test reports that the location of the VertualCursor is >> >>> >not in the active window. >> >>> >If IsPointInWindow (ThePCCursorWindowHandle, GetCursorCol(), >> >>> >GetCursorRow ()) == true then SayString ("true this point is in >> >>> >the active window ") Else SayString ("false the point is not in >> >>> >the active >> >>> >window") EndIf >> >>> > >> >>> >I don’t know how relevant the following information is, but >> >>> >here it is for interest. >> >>> >The X-Y coordinates for the button when the VertualCursor is active > is: >> >>> >1, 115 The X-Y coordinates for the button when either the >> >>> >JAWSCursor or the InvisibleCursor is used is: 500, 555 >> >>> > >> >>> >There is one other problem that might be somehow related. I find >> >>> >that JAWS stopped tracking the standard windows download file >> >>> >notices sometimes last winter. In other words when I download a >> >>> >file from the internet and the box pops up to ask if I want to >> >>> >save or run the program, JAWS no longer automatically finds this >> >>> >box. This problem happens for me now in JAWS 13 and 14. It used to > work fine in JAWS 13. >> >>> >I only mention this, because it is a strange change that did not >> >>> >happen in relationship to a JAWS update. >> >>> > >> >>> >If you have any other questions or suggestions, please pass them > along. >> >>> > >> >>> >Thanks, >> >>> >John >> >>> > >> >>> > >> >>> >-----Original Message----- >> >>> >From: jawsscripts-bounce@xxxxxxxxxxxxx >> >>> >[mailto:jawsscripts-bounce@xxxxxxxxxxxxx] On Behalf Of The dark >> >>> >count >> >>> >Sent: Monday, October 21, 2013 1:59 PM >> >>> >To: jawsscripts@xxxxxxxxxxxxx >> >>> >Subject: [jawsscripts] Re: Alternative methods for clicking a >> >>> >button >> >>> > >> >>> >Make sure Jaba script is enabled in ie. if not. >> >>> >Buttons or some links don't show up when switched off. >> >>> > >> >>> >D C >> >>> > >> >>> >On 10/19/2013 3:31 PM, John P. Thomas wrote: >> >>> > > Hi >> >>> > > >> >>> > > I have a button on a web page in Internet >> >>> > Explorer 10 running under WIN7 that I am unable to activate. I >> >>> > can click the button without any problem when I use Firefox, but >> >>> > in IE I cannot activate it with either a LeftMouseClick >> >>> > (insert+slash) or with the enter key. I tried routing the >> >>> > JAWSCursor and the InvisibleCursor, and I have tried tethering >> >>> > the JAWSCursor to follow the VertualCursor, but I can't activate >> >>> > the 'Save' button on this web based data form. >> >>> > > >> >>> > > I have been using Firefox with this >> >>> > particular web application for my work situation, but I really >> >>> > need to switch to IE10. >> >>> > Firefox crashes 2 to 3 times a day, which is a real problem, >> >>> > since it often locks up my laptop when it crashes and requires a >> >>> > forced shutdown. >> >>> > > >> >>> > > What other approaches could I use to get JAWS >> >>> > 14 to activate an uncooperative button. By the way, all other >> >>> > buttons on the page work fine in either IE10 or Firefox. >> >>> > > >> >>> > > Thanks, >> >>> > > John >> >>> > > >> >>> > > -----Original Message----- >> >>> > > From: jawsscripts-bounce@xxxxxxxxxxxxx >> >>> > > [mailto:jawsscripts-bounce@xxxxxxxxxxxxx] On Behalf Of Jim >> >>> > > Snowbarger >> >>> > > Sent: Saturday, October 19, 2013 5:35 PM >> >>> > > To: jawsscripts@xxxxxxxxxxxxx >> >>> > > Subject: [jawsscripts] Re: Virtual Viewer Help >> >>> > > >> >>> > > One of the parameters to UserBufferAddText is the name of a >> >>> > > function that will be executed if you press enter on >> >>> > the line of text you are adding. >> >>> > > Supplying that parameter makes it a link. And, I think you >> >>> > > also need to supply another parameter which is the name of the >> >>> > > link to be used if anybody presses jawsKey+f7 while in your > buffer. >> >>> > > >> >>> > > ----- Original Message ----- >> >>> > > From: "Bob" <temp@xxxxxxxxxxxxxxx> >> >>> > > To: <jawsscripts@xxxxxxxxxxxxx> >> >>> > > Sent: Saturday, October 19, 2013 3:10 AM >> >>> > > Subject: [jawsscripts] Re: Virtual Viewer Help >> >>> > > >> >>> > > >> >>> > > Yeah, didn’t make any difference. >> >>> > > >> >>> > > What I found was UserBufferAddText ignores the %KeyFor In the >> >>> > > end the only way I could get it to work as I wanted was to do >> >>> > > something >> >>>like: >> >>> > > SayFormattedMessage(OT_USER_BUFFER, >> >>> > > FormatStringWithEmbeddedFunctions(Message)) >> >>> > > >> >>> > > Then the message just consisted of a function call like >> >>> > > <GenerateLink> >> >>> > > >> >>> > > Then I had a function GenerateLink() that returned the line >> >>> > > %KeyFor(CustomClickAtPoint(GlobalVar1, GlobalVar2, >> >>> > > GlobalVar3)) >> >>> > > >> >>> > > A pain in the proverbial but did the trick. >> >>> > > I used my own click at point script so that I didn’t have to >> >>> > > add a keystroke to the script so the %KeyFor wasn’t adding >> >>> > > unwanted text to my output. Also I needed some extra custom >> >>> > handling for some special circumstances. >> >>> > > >> >>> > > So I got there in the end but I wouldn’t have had a clue >> >>> > > without your help so big thanks John. >> >>> > > >> >>> > > >> >>> > > >> >>> > > -----Original Message----- >> >>> > > From: jawsscripts-bounce@xxxxxxxxxxxxx >> >>> > > [mailto:jawsscripts-bounce@xxxxxxxxxxxxx] On Behalf Of John >> >>> > > Martyn >> >>> > > Sent: 18 October 2013 03:53 >> >>> > > To: jawsscripts@xxxxxxxxxxxxx >> >>> > > Subject: [jawsscripts] Re: Virtual Viewer Help >> >>> > > >> >>> > > Did you clear the user buffer before adding? >> >>> > > John >> >>> > > >> >>> > > -----Original Message----- >> >>> > > From: jawsscripts-bounce@xxxxxxxxxxxxx >> >>> > > [mailto:jawsscripts-bounce@xxxxxxxxxxxxx] On Behalf Of Bob >> >>> > > Sent: Thursday, October 17, 2013 9:01 AM >> >>> > > To: jawsscripts@xxxxxxxxxxxxx >> >>> > > Subject: [jawsscripts] Re: Virtual Viewer Help >> >>> > > >> >>> > > Thanks John >> >>> > > I have found that UserBufferAddText doesnt replace the % in >> >>> > > the way that SayFormattedMessage does. >> >>> > > Also had some fun trying to drop parameters into the function >> >>> > > as well so I could use the following: >> >>> > > %KeyFor(ClickAtPoint(iColumn, iRow, Coordsys_Pixels)) >> >>> > > >> >>> > > Ended up using global variables and bouncing the message >> >>> > > through FormatStringWithEmbeddedFunctions >> >>> > > >> >>> > > I am getting fed up of this application! >> >>> > > >> >>> > > >> >>> > > On 17/10/2013 14:09, John Martyn wrote: >> >>> > >> The %keyFor() function must tie to the exact script name in >> >>> > >> the parenthesis. You have to place this line inside a >> >>> > >> variable and if in a message file JSM, you need the messages >> >>> > >> and endMessages at the top and bottom. Make sure that the >> >>> > >> percent sign >> >>> > isn't right up against the words. >> >>> > >> John >> >>> > >> John >> >>> > >> >> >>> > >> -----Original Message----- >> >>> > >> From: jawsscripts-bounce@xxxxxxxxxxxxx >> >>> > >> [mailto:jawsscripts-bounce@xxxxxxxxxxxxx] On Behalf Of Bob >> >>> > >> Sent: Thursday, October 17, 2013 3:50 AM >> >>> > >> To: jawsscripts@xxxxxxxxxxxxx >> >>> > >> Subject: [jawsscripts] Re: Virtual Viewer Help >> >>> > >> >> >>> > >> Thanks John >> >>> > >> >> >>> > >> I still dont seem to be getting this working properly. >> >>> > >> >> >>> > >> I have added the message exactly as you had it to my messages >> >>> > >> section in my header file. >> >>> > >> >> >>> > >> When I do UserBufferAddText and then UserBufferActivate it >> >>> > >> just appears as plain text. >> >>> > >> >> >>> > >> What am I doing wrong? >> >>> > >> >> >>> > >> Bob >> >>> > >> >> >>> > >>> On 16 Oct 2013, at 23:08, John Martyn >> >>> > >>> <johnrobertmartyn@xxxxxxxxx> >> >>>wrote: >> >>> > >>> >> >>> > >>> Yes, use this: >> >>> > >>> @navigationKeys Navigation Keys Go to Home Page %KeyFor >> >>> > >>> (HomePage) @@ The key for is the name of the script that is >> >>> > >>> activated using a link style navigation. >> >>> > >>> John Martyn >> >>> > >>> >> >>> > >>> -----Original Message----- >> >>> > >>> From: jawsscripts-bounce@xxxxxxxxxxxxx >> >>> > >>> [mailto:jawsscripts-bounce@xxxxxxxxxxxxx] On Behalf Of Bob >> >>> > >>> Sent: Wednesday, October 16, 2013 4:35 AM >> >>> > >>> To: jawsscripts@xxxxxxxxxxxxx >> >>> > >>> Subject: [jawsscripts] Virtual Viewer Help >> >>> > >>> >> >>> > >>> I have an application that has nearly no keyboard navigation. >> >>> > >>> >> >>> > >>> I am hoping to be able to scrape the useful information off >> >>> > >>> each screen and use the virtual viewer to display this. >> >>> > >>> >> >>> > >>> Once this is running I would like to add links to the >> >>> > >>> information displayed so that the user can input additional >> >>> > >>> information where required. >> >>> > >>> >> >>> > >>> Is it possible to add a link or a button or anything to the >> >>> > >>> virtual viewer output that will allow me to close the viewer >> >>> > >>> and trigger a different function in my jaws scripts when it >> >>> > >>> is pressed? >> >>> > >>> >> >>> > >>> Thanks >> >>> > >>> >> >>> > >>> Bob__________o?= >> >>> > >>> >> >>> > >>> View the list's information and change your settings at >> >>> > >>> http://www.freelists.org/list/jawsscripts >> >>> > >>> >> >>> > >>> __________ >> >>> > >>> >> >>> > >>> View the list's information and change your settings at >> >>> > >>> http://www.freelists.org/list/jawsscripts >> >>> > >>> >> >>> > >> __________ >> >>> > >> >> >>> > >> View the list's information and change your settings at >> >>> > >> http://www.freelists.org/list/jawsscripts >> >>> > >> >> >>> > >> __________ >> >>> > >> >> >>> > >> View the list's information and change your settings at >> >>> > >> http://www.freelists.org/list/jawsscripts >> >>> > >> >> >>> > > __________ >> >>> > > >> >>> > > View the list's information and change your settings at >> >>> > > http://www.freelists.org/list/jawsscripts >> >>> > > >> >>> > > __________ >> >>> > > >> >>> > > View the list's information and change your settings at >> >>> > > http://www.freelists.org/list/jawsscripts >> >>> > > >> >>> > > >> >>> > > __________ >> >>> > > >> >>> > > View the list's information and change your settings at >> >>> > > http://www.freelists.org/list/jawsscripts >> >>> > > >> >>> > > >> >>> > > >> >>> > > __________ >> >>> > > >> >>> > > View the list's information and change your settings at >> >>> > > http://www.freelists.org/list/jawsscripts >> >>> > > >> >>> > > __________ >> >>> > > >> >>> > > View the list's information and change your settings at >> >>> > > http://www.freelists.org/list/jawsscripts >> >>> > > >> >>> > > >> >>> > >> >>> >-- >> >>> >Thanks, >> >>> > >> >>> >D C >> >>> > >> >>> >__________ >> >>> > >> >>> >View the list's information and change your settings at >> >>> >http://www.freelists.org/list/jawsscripts >> >>> > >> >>> >__________ >> >>> > >> >>> >View the list's information and change your settings at >> >>> >http://www.freelists.org/list/jawsscripts >> >>> > >> >>> >__________ >> >>> > >> >>> >View the list's information and change your settings at >> >>> >http://www.freelists.org/list/jawsscripts >> >>> > >> >>> >__________� >> >>> > >> >>> >View the list's information and change your settings at >> >>> >http://www.freelists.org/list/jawsscripts >> >>> >> >>>__________� >> >>> >> >>>View the list's information and change your settings at >> >>>http://www.freelists.org/list/jawsscripts >> >>> >> >>>__________� >> >>> >> >>>View the list's information and change your settings at >> >>>http://www.freelists.org/list/jawsscripts >> >> >> >> __________� >> >> >> >> View the list's information and change your settings at >> >> http://www.freelists.org/list/jawsscripts >> >> >> >> __________� >> >> >> >> View the list's information and change your settings at >> >> http://www.freelists.org/list/jawsscripts >> >> >> >> __________� >> >> >> >> View the list's information and change your settings at >> >> http://www.freelists.org/list/jawsscripts >> >> >> >> __________� >> >> >> >> View the list's information and change your settings at >> >> http://www.freelists.org/list/jawsscripts >> >> >> > >> > __________� >> > >> > View the list's information and change your settings at >> > http://www.freelists.org/list/jawsscripts >> > >> > __________� >> > >> > View the list's information and change your settings at >> > http://www.freelists.org/list/jawsscripts >> > >> >>__________� >> >>View the list's information and change your settings at >>http://www.freelists.org/list/jawsscripts >> >>__________� >> >>View the list's information and change your settings at >>http://www.freelists.org/list/jawsscripts > > __________� > > View the list's information and change your settings at > http://www.freelists.org/list/jawsscripts > > __________� > > View the list's information and change your settings at > http://www.freelists.org/list/jawsscripts > __________� View the list's information and change your settings at http://www.freelists.org/list/jawsscripts